Author Topic: BB2 to BB3 conversion problem. (Read 836 times)

Maxpay72 · « **on:** March 15, 2024, 03:20:26 PM »

Hello all! I did a BB2 to BB3 conversion and everything works great up until the configuration in progress comes up. The top screen has the Linux Starting box in the middle and the bottom screen has the configuration in progress and the call attendant. The OLED buttons are on the WMS screen. It is just sitting at that point for a long time. Any ideas? Thanks

Maxpay72 · « **Reply #1 on:** March 15, 2024, 03:34:33 PM »

Here is a screen shot.

Yoeddy1 · « **Reply #2 on:** March 15, 2024, 04:58:33 PM »

So you cleared the machine, and you’re trying to load Bier Haus 200? The red security dongle light is on and the 4 left most MPU lights are on? You’re using an NXT3.2 I’m assuming? All that you changed was the MPU from an NXT2 to an NXT 3.2?

Thanks,
Jason

Maxpay72 · « **Reply #3 on:** March 15, 2024, 06:22:46 PM »

I did clear the machine. And then installed the Game Chest 14. The game chest didn’t come with a dongle. I will check the lights. I did change out the NXT2 for a NXT 3.2. Do I need to plug in the top monitor to the DVI or? Thanks

Maxpay72 · « **Reply #4 on:** March 15, 2024, 06:26:43 PM »

Ya.. the four left lights are on green and the two to the right are red. Thanks

seadoo10 · « **Reply #5 on:** March 15, 2024, 08:31:51 PM »

Did you do the cabinet mod?

Yoeddy1 · « **Reply #6 on:** March 16, 2024, 01:05:13 AM »

That’s why I stay away from that game. There’s some hardware modification that needs to happen from what I’ve heard. Try with a legit OS and game CF and dongle to see if your machine can load a game up.

Jason

Maxpay72 · « **Reply #7 on:** March 16, 2024, 05:33:31 AM »

I didn’t do any cabinet mods. Could someone explain how to do that? Thanks

Maxpay72 · « **Reply #8 on:** March 16, 2024, 07:05:34 AM »

FYI.. I do have the BB2 emotive light kit. Thanks

dragster73 · « **Reply #9 on:** March 16, 2024, 07:14:55 AM »

Somebody smarter then me may know for sure, but from what I'm reading in the fault the monitor resolution is incorrect. I know certain games have to have a larger monitor. Maybe someone reading my response knows for sure.

My experience with the cabinet not being right is indicated in the an error on screen..

idesign · « **Reply #10 on:** March 16, 2024, 08:52:35 AM »

As I recall you have to configure the machine as a Blade cabinet with jumpers on the backplane and it involves cutting a wire too.

seadoo10 · « **Reply #11 on:** March 16, 2024, 10:01:36 AM »

https://newlifegames.com/nlg/index.php?topic=38997.msg210421#msg210421

Scroll to the last few replies on this post and it will explain the cabinet mod needed.

Maxpay72 · « **Reply #12 on:** March 16, 2024, 01:28:02 PM »

Yahoo.. it’s alive! Now the monitor offset problem. Tried adjusting the monitors without any luck. What do I do now? 😝. Screen shot

shortrackskater · « **Reply #13 on:** March 16, 2024, 04:02:59 PM »

Quote from: Maxpay72 on March 16, 2024, 01:28:02 PM

Yahoo.. it’s alive! Now the monitor offset problem. Tried adjusting the monitors without any luck. What do I do now? 😝. Screen shot

Again, please refrain from using offsite photo hosting. The images will disappear over time.
Please use the NLG system. "Attachments and other options"
Thank you.

Maxpay72 · « **Reply #14 on:** March 16, 2024, 04:47:41 PM »

Ok.. sorry about that!

Maxpay72 · « **Reply #15 on:** March 16, 2024, 04:50:04 PM »

Not sure what the NLG system is. Please advise. Thanks

Maxpay72 · « **Reply #16 on:** March 16, 2024, 04:51:18 PM »

Do you mean adjusting the photos to fit the size requirement’s of the site?

idesign · « **Reply #17 on:** March 16, 2024, 04:55:54 PM »

Yes, attach your photos to your messages using this site, not elsewhere

seadoo10 · « **Reply #18 on:** March 16, 2024, 05:01:32 PM »

Just curious, was it the cabinet mod that got you going or something else?
Use these to adjust the resolution on the monitors. One for each monitor. I also purchased the short cables to help with installation.

https://www.amazon.com/passthrough-rearrange-splittersand-Extenders-2560X1600/dp/B07YMNCP88/ref=sr_1_5?crid=1UU8NULHD8N6Y&dib=eyJ2IjoiMSJ9.FrFahcsz3JdtdVCSwCuiiT7Xvd-KlF0v7QWiKs_sf2fJPo_RpETTGmxZ9Mbw3j4Cgbs64GsJc2z5vqGvDDppXkcBqXI2cbwtItoYRn6XXdoFhTricxKINvOFzsvgTQMlImSmHMpxfYtZTdaE41qesuaFqFaWFHS2pJD9SXQKr6NihR81od7lN3j-RFiFqFAp4B3PBnjP51R_CBmnsvCPbx3CfoKZ9V9lqtQNXJbRRs1sCjlWqw1N0IY4uyvMfv_NqUQwARFu3J5dpaOMZeek40xciTBmBh45LRytRJELWR0.2unHc7KD5JvKBsyYHeapD4bFs_vPRZ4Y82by-Q5czSY&dib_tag=se&keywords=Evanlak+DVI+edid+Emulator&qid=1710633609&s=electronics&sprefix=evanlak+dvi+edid+emulator%2Celectronics%2C96&sr=1-5

https://www.amazon.com/StarTech-com-DVI-D-Digital-Saver-Extension/dp/B006PGHHO0/ref=sr_1_1?crid=3Q82Q55VAOI21&dib=eyJ2IjoiMSJ9.XwsdFG7Z0q_AwUIqWaexW_3F60ue4DrXfFy8cv7XKjQZ-IvMee7vnA85zROnVqYkPGXjXP0ByCTuOGrAC-BWB18r5pM1sGgaAQKosZ_tAGCII8OS3uv0rQRUBNLkTLJZ7pwYLwA0QjY6kha-nzidBZthKbBvt7lLlFLkSbCLNHh-3QqnoHhLy4F-_Q9BzMJ688yIvhMMVAj6LNWVXGb3yPLy7elE9gPlG4iXaMtdnLRLtq4i1tnwsUCuAmsPc8U8b8OlOP49ELkzdxGI6YlMmLDMzqKGXDeH30dxK4-WCGc.knX6lLxjfXzH013rNa1JvdlqKjEdzwsuh6931gt-GEY&dib_tag=se&keywords=startech.com%2Bstartech.com%2B6in%2Bdvi-d%2Bdual%2Blink%2Bdigital%2Bport%2Bsaver%2Bextension%2Bcable%2Bm%2Ff%2B-%2Bdvi-d%2Bmale%2Bto%2Bfemale%2Bextension%2Bcable%2B-%2B6%2Binch%2B-%2B2560x1600&qid=1710633554&s=electronics&sprefix=%2Celectronics%2C101&sr=1-1&th=1

Maxpay72 · « **Reply #19 on:** March 16, 2024, 05:40:44 PM »

Well.. I purchased a Duel Link DVI cable for the upper screen. I didn’t do any cabinet mods. Just the DVI cable. So just need to get the DVI emulator for each screen to fix the screen being off the screen on one side. Fantastic help from all on this site! 😁👍

News:

NLG Site Navigation Menu

Author Topic: BB2 to BB3 conversion problem. (Read 836 times)