IGT S+ RED,WHITE,& BLUE lost LED,s and tilt

[jim k-falls]

I pushed the spin reel button and the hopper started spitting coins..had to push the test button to stop it and then the reels spun and stopped on red white and blue 7's top J.P.

[jim k-falls]

I got 4 coins played 0  blinking and changing to 2400 credits and a # 1 in the winner paid

[knagl]

put in the new game chip and we got 62_1..i stopped and will wait to hear from you or one of the other experts..

62_1 is a "bad DATA prom" error.  It indicates that the data ("SS") chip is bad, or incorrectly inserted.  Ensure that all of the legs of the SS chip are inserted correctly into the "REEL PROM" socket on your MPU board.

If the chip is in the correct socket and seated correctly and you still get that error, you have a bad data (SS) chip.

You can see a list of common IGT S+ errors, and the steps to take to resolve those errors, here:

http://newlifegames.net/igterrors/

[Buzz]

Kevin  I just sent him a SP, SS and a clear chip. I didn't test the chips but I think they were good. The burner verified that it was programed OK. But that's no guarantee is it !!

[Neonkiss]

I've swapped MPU's before and got the 62-1 when the program does not match the E-square chip on the motherboard. Turn the JP key and it shows 61-1 and proceed from there.

[jim k-falls]

I was thinking mabe I should try the clear chip again and see if it gets me back to 62_1..or what would happen if I put my chips back in after clearing> just a thought..im going out of town for the day and wont be back til tonite but ill be thinking about this all day..thanks guys

[jim k-falls]

well, I got home and flipped the switch, reels spun and it stopped on red white and blue 7's again, so I pushed the test button and it went to 60_0 and spin reels lit up..i pushed it and it sang out all kinds of tunes while changing 60_0 to 60_5 5 different tunes ..then it went back to all 8's again..i stopped pushing  buttons and after 1 min it clicked and its at 21_ _ in the winner paid. coin in error problem? im going to clear it again unless someone else has an idea.i can get the display to change to 50  or 60__0 or all 8's and I think 1_01..if that helps..

[Badbaud]

The only solution I have at this point is to have you send it to a shop.

Call Larry at 702-363-9998 and arrange to have your computer board and backplane board sent.

I will go through them when they arrive, and test them in our shop machine.

[jim k-falls]

I appreciate the offer and may have to take you up on that, but not yet..im stubborn as hell and im going to try and fix this sonofagun..I still have the original board and backplane to put back in and run the clear chip on..If I am in test mode I should be able to advance through it..if I am in book keeping well its got to advance through that too..

[jim k-falls]

 :yes:Well, I must say this machine had some demons, but its running now and it seems that I had an coin in optic problem. I read some old post that jim from Midwest was explaining how to check ..I got the 10_1 but it wouldn't change with the popsickle stick,,11_1 and 12_1 both changed the 1 to 0..so I took the optics apart and cleaned them, with no results..i had a spare so I cleaned that one and it was the same..10_1 wouldn't change...so I cleaned the 10 blade connections with scotchbrite and put a little twist in them and i'll be damn..shes working and now I want to say thanks to all you guys and gals for the help and advice..that was quite the learning lesson and im a little more knowledgable on I G T S +..but a long way to go..in fact as im writing this my dad has informed me that he pushed the cash out button and to see if it would give him the credits and it spit out a couple of quarters then went to tilt 32..new topic?

[knagl]

This topic is locked to prevent confusion since the original issue was resolved.

The new topic with the new hopper payout/"32" in the display issue can be found here:

http://newlifegames.com/nlg/index.php?topic=1683.0