Thank you for the information.
I am installing a Gen2 Universal Printer setup for netplex into a 17" round top Igt Lucky Larry Lobstermania that doesn't have one. I have been looking for a manual or information with pictures that will help me to know where the connections go. It has a curly cable setup with a three wire and a fourteen wire connectors, and USB end. I have not seen any place to plug in a USB plug. I have contacted the person that sold me the brackets, bezel, and a 10 wire harness. He told me that he needs to find and send me a 14 wire harness for it, and the bezel with the smaller 3 wire plug. The one he sent has a connector that is twice as large and only has 2 wires, while the bezel it has currently has a smaller 3 wire connector for the printer.
I hope someone has a manual that can help me install this correctly.