Author Topic: IGT S+ Error Code "GRADR=???" (Read 3939 times)

knagl · « **Reply #40 on:** July 31, 2020, 11:48:33 PM »

I'm guessing his game isn't going to be in the IGT game bible. There's only three 4-reel games in there, and this is an international theme to boot. Hopefully someone will have the needed documentation.

Weissa1989: with the machine turned OFF, can you remove the hopper, remove the silver MPU board tray in the back of the machine, and post a picture of the board and the chips on it? Hopefully the chips are labeled.

qbert · « **Reply #41 on:** August 01, 2020, 03:34:44 AM »

Any history you have on the machine would also help.
Is it directly from a casino or did it operate in someone's home before you purchased it. Since you are not in the states obtaining parts may be more difficult and expensive. Pictures of the mpu and the chips will help a lot troubleshooting your new machine.

Weissa1989 · « **Reply #42 on:** August 01, 2020, 04:36:16 AM »

Hello Guys!
Thank you very much for your support. Tomorrow I will take some pictures of the MPU.
Hopefully it gave me/you all the information I need to get the slot run.
This beautiful piece should be a in working condition eyecatcher. :-)

Weissa1989 · « **Reply #43 on:** August 02, 2020, 11:51:53 AM »

Here are the pictures of my MPU.
Hope, we'll find the correct spare parts.

Weissa1989 · « **Reply #44 on:** August 02, 2020, 12:30:34 PM »

I found the number "SS6372" in following list:

http://newlifegames.net/nlg/index.php?topic=156.0

But what I can do with this information?

Br

Fixed tiny font issue. Last line of text in original post said "Br". -knagl

jay · « **Reply #45 on:** August 02, 2020, 12:45:39 PM »

Also your game chip is sp1168

So... you can use this information to request the PSR and PAR sheets in the other area of the forum.
The PSR will tell you how to change your game options.

This will also tell you the TYPE so if you want to change game chips you can select a compatible one.

The PAR will show you your reel stop order and %% paybacks.

Weissa1989 · « **Reply #46 on:** August 02, 2020, 01:53:05 PM »

Hello everyone!
Since a view days I'm owner of an IGT S+ slot.
First error "12" solved. Than error "61" shown - no chance to come to error 61-1 so I have to check a RAM Chip (Game Prom) and a B/V Chip.

Is there anybody who knows where I can buy the correct chips to solve error 61 and further who can organise the PSR/PAR sheets to get my slot run?

Thx in advance.

rickhunter · « **Reply #47 on:** August 02, 2020, 01:55:25 PM »

http://www.newlifegames.net/igterrors/

Weissa1989 · « **Reply #48 on:** August 02, 2020, 02:00:55 PM »

I already know that hints - thx.
But there is no chance to come to 61-1 by pushing the test button.
So its necessary to clear "Game prom" and the B/V Chip.

knagl · « **Reply #49 on:** August 02, 2020, 10:52:41 PM »

Are you saying that your machine does not advance from "61" to "61 1" when you press and hold the white self-test button near the power switch for about 5 seconds? Are you holding the button down, or just pressing it? You need to hold the button down for at least 5 seconds.

Also, I merged the new thread you created here in the S+ section into this thread since it's all about this same machine.

I did create a new post on your behalf in the section to request documentation, asking if anyone has the documents for the chips that are installed in your machine. You can see that thread here, and hopefully someone is able to come through with some information for you:

http://newlifegames.com/nlg/index.php?topic=29101.0

Weissa1989 · « **Reply #50 on:** August 02, 2020, 11:45:24 PM »

I hold down the test button for round 10 seconds but nothing happens.
Either a "ding-sound" or a switch from 61 to 61-1...

Thx @knagl for open the new thread in the correct section of this forum!

Weissa1989 · « **Reply #51 on:** August 10, 2020, 02:22:14 PM »

Hi Guys!

I guess next week I will get my RAM Clear chip and the B/v Chip.
I want to start as soon as I will receive them. ^^

Should I start with clearing of the game prom or with the B/v chip?

Br

knagl · « **Reply #52 on:** August 11, 2020, 07:39:33 AM »

Do the RAM clear first.

If you were to enable the bill validatior first and then did a RAM clear after that, it would just clear out the setting you had just made.

Weissa1989 · « **Reply #53 on:** August 20, 2020, 08:16:31 AM »

Hi Guys!

Today I received my clear chip.
According to this description I put in the ram clear chip, start the machine, push the "spin reels" button that the ram gets cleared (shown 999).
After that I put in the SP chip and start the slot again.
Than the error 61 was shown - press the white button near the power button - nothing ever happened...

What can I do guys? I have no idea...

shortrackskater · « **Reply #54 on:** August 20, 2020, 08:49:45 AM »

Did you hold the white button in for awhile?

Weissa1989 · « **Reply #55 on:** August 20, 2020, 08:52:47 AM »

Yep. For about 10 seconds and longer... :-(

jay · « **Reply #56 on:** August 20, 2020, 09:07:59 AM »

When running the Clear chip .....did you get the count up ?? and you landed at the "2 999"
Please see these instructions....
http://newlifegames.com/nlg/index.php?topic=16134.0

Amechanic · « **Reply #57 on:** August 20, 2020, 09:19:05 AM »

Quote from: Weissa1989 on August 20, 2020, 08:16:31 AM

Hi Guys!

Today I received my clear chip.
According to this description I put in the ram clear chip, start the machine, push the "spin reels" button that the ram gets cleared (shown 999).
After that I put in the SP chip and start the slot again.
Than the error 61 was shown - press the white button near the power button - nothing ever happened...
What can I do guys? I have no idea...

I think your problem is that to do the clear, you have to push the small white test button inside and not the reel spin button. The machine will then start counting up to 999. You want to do this at least 2 times.

Weissa1989 · « **Reply #58 on:** August 20, 2020, 09:24:20 AM »

With the clear chip an instruction manual is coming with.
According this manual I have to push the "reel spin" button.
When I do this one of the small displays shows some numbers till it comes to 999...

So I will check what happens when I click instead of the "reel spin" button the white test button...

Hope it will help! 😊

Amechanic · « **Reply #59 on:** August 20, 2020, 09:28:00 AM »

If your see the display count up to 999 then that it. I was always taught to clear at least two time.

News:

NLG Site Navigation Menu

Author Topic: IGT S+ Error Code "GRADR=???" (Read 3939 times)