Help with Error Code

[Eddie248]

WORK FINE FOR YEARS NOW KEY WONT CLEAR CODES TRIED TO CHANGE OUT THE IO BOARDS AND NOTING WORKS ANY HELP?

[Tilt]

 

I started a separate topic for your problem.  What are the error messages you're seeing?  It would be helpful if you post a picture of them and your machine so we know what one you have.  Pictures have to be less than 1MB in size, so please resize as necessary to get under that limitation. 

Also please refrain from using all caps in your post.  It's considered to be yelling and a little rude.

[Eddie248]

codes will not clear any one in  Michigan that can help

[Eddie248]

pic

[sixcardmark]

Did you get those errors before or after you swapped I/O boards?  You will need a key 22 or 40 and clear machine to get anywhere from here most probably.

[Tilt]

Thanks.  Can you also take a picture of the program version information screen.  To get to it you press the self test button on the front of the MPU, then touch the accounting box, then program version accounting.  After a 10 - 15 seconds the screen will populate with the information. 

If you're looking for service in MI send a PM to Sunrise Side, he may be able to help depending on where in the state you are.

[Eddie248]

the codes were before i switch out the boards

[Eddie248]

I will have to get the program version later i am not by the machine