21
IGT S2000 and Vision Games / Re: IGT- Crystal 7's machine- Ram error
« Last post by shortrackskater on Yesterday at 06:11:41 PM »That is S2000 board, this is S+ section. Key 17 is for Game King.
Moved to S2000 board.
Welcome to the NewLifeGames.com message forum!
|
21
IGT S2000 and Vision Games / Re: IGT- Crystal 7's machine- Ram error« Last post by shortrackskater on Yesterday at 06:11:41 PM »That is S2000 board, this is S+ section. Key 17 is for Game King. Moved to S2000 board. 22
IGT S2000 and Vision Games / Re: setup hopper and tickets on my i dream of jeannie« Last post by armyaviation on Yesterday at 06:09:09 PM »the hopper limit right now is $1000. is that what it will pay before it prints a ticket\?
23
IGT S2000 and Vision Games / Re: setup hopper and tickets on my i dream of jeannie« Last post by Stayouttadabunker on Yesterday at 06:06:08 PM »What happens if you set the hopper limit to 80?
24
BALLY Game Maker / Re: Game Maker 7200, Hot Hot Hot setup issue« Last post by Bmwsyc on Yesterday at 06:00:11 PM »I can get all the way to the end setting it up, when I exit setup and close the door, I get the second picture.
25
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Ballys V32 Slots machines for sale Roulett,Quick pick and« Last post by robdman on Yesterday at 05:57:30 PM »I have 3 Bally V32 machines @ $1400 a piece they have all worked and sat for 3 years and I replaced all of with new battery's and now need to be reprogram and one needs a small harness connector to the Bill validator box i misplaced so that one is only $1350 I have a brand new TiTO packages purchased and they are ready to install .I prefer to have these picked in near Los Angeles CA. I have Quick Picks ,Roulette and Breeders cup .if you want to use your own software they would be only $1300 a piece.
26
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Yesterday at 05:51:12 PM »This is the door switch, the issues were the wiring, some bozo changed it around, this is why I was having issues. Once I pulled up the wiring diagram everything worked out. The photo is what it was before I rewired it.
Now I have to figure out why the dollar bill is not talking to the MPU. It accepts the dollar, however the machine is not registering it. But I am making progress here, were playing with the machine. 😊 27
IGT S2000 and Vision Games / Re: Upgrade from 501 board to 504?« Last post by sixcardmark on Yesterday at 03:47:25 PM »Your machine has an SB001000 and an S+ 97% SS chip on it. You need either a different SS chip or the correct SB chip and the correct key chip to change payout %. Key 17 is for game king.
28
IGT S2000 and Vision Games / Re: IGT- Crystal 7's machine- Ram error« Last post by sixcardmark on Yesterday at 03:32:36 PM »That is S2000 board, this is S+ section. Key 17 is for Game King.
29
IGT S2000 and Vision Games / IGT- Crystal 7's machine- Ram error« Last post by cablegator on Yesterday at 03:20:44 PM »Folks, I replaced battery, ran clear and key17 chip. still getting ram error. Is my board toast or is there something I'm missing? Its a 1952-0 model. Picture attached.
Thanks! 30
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on Yesterday at 03:17:27 PM »I have some of the coin assembly parts that came in the mail. Also the reset key came in the mail.
Encoder, coin block, coin acceptor bracket. |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |