I'm a total newbie. My first post didn't go through as the attached photo was too large so I'm trying to reconstruct my question.
I just received my new GK044 enhanced machine. I've got a ton of questions. I set it up after a 9 hour drive home and found the buttons were not functioning. I checked the I/O board and reseated only to discover that there are two I/O boards, one inside the cabinet and one on the door. I guess the vibration caused the one on the door to become dislodged. That was a relief.
I notice that there are three internal meters on the door. The far right one is clicking and not advancing. So when a bill is inserted, it just tries to advance for an awfully long time. Several minutes and I'm not sure if it even goes off. If the connector is disconnected, it will generate a "CALL ATTENDANT Meter Disconnected" error. The I/O check is somewhat flaky too, it will show 0 or 1 under Meter Disconnect.
I am able to play all the games but the clicking noise is annoying.
I have not seen or read anyone else having issues with meters? Any comments.
This is my second machine. My first is a electro/mechanical Bally Moneyhoney. The reels just got repaired and waiting to be picked up. Any help or suggestions would be appreciated from this newbie. Thanks.