IGT s2000 Slotto Top Globe

[marcbollinger]

Anybody have?


Marc

[Ash100]

Marc,


I've got a complete Globe assembly. The graphics don't match yours, but it's all there.


The Globe itself is a little cloudy from the ping pong balls bouncing around inside of it, but someone with a little knowledge of plastic polishing and restoration may be able to get some of that to clear up.


Attached are some photos. Feel free to PM me if you're interested.


Curtis ash100

[marcbollinger]

Marc,


I've got a complete Globe assembly. The graphics don't match yours, but it's all there.


The Globe itself is a little cloudy from the ping pong balls bouncing around inside of it, but someone with a little knowledge of plastic polishing and restoration may be able to get some of that to clear up.


Attached are some photos. Feel free to PM me if you're interested.


Curtis ash100

Hey Curtis,


Sorry for the delay in getting back with you - been a crazy week. I'm afraid I would be trading one problem for another and I know that topper will be expensive to ship haha.


I appreciate it though - decided to pass on picking up this slot anyway (private seller, didn't want to budge on price). His globe has a hole in it.


Best,
Marc

[BarsNCherrys]

All you have to do to clear that up is clean it, then hit it with some Novus2 polish.

[Ash100]

No problem Marc.


And thanks for the cleaning tip BarsNCherrys.


Curtis ash100

[Thiggy1977]

Ok so I bought this machine. And man do I need some help. It was working then it went to crap. I bypassed the door optics. I tried to reset using the reset chips and now when I get to put the game chip in to program and do the reset key four time to set it up all I keep getting is close main door. I bypassed using the method I seen on here with the cherry switch. I need help please.

[sixcardmark]

You should start your own thread.  Why did you bypass the door optics in the first place?  Does your mpu board have a varta battery on it?

[Thiggy1977]

I had to bypass because I couldn’t get the door optics to ever line up. It would not work right. I bypassed it and it worked for a bit then it went out again for open MB and bill validator which those have been bypassed as well. It only have the small flat battery. I’ve tried everything to get it to work and nothing has worked. Need major help. Have no idea what to do

[Thiggy1977]

How do I start a new feed on here. I’m new to this.

[marcbollinger]

How do I start a new feed on here. I’m new to this.

Go into the S2000 sub-forum, this forum is reserved for buying and selling.


Here you go: [size=78%]IGT S2000 and Vision Games (newlifegames.com)[/size]