New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/
« previous next »
Pages: [1]   Go Down

Author Topic: S2000 backlit reel bulbs information needed  (Read 2591 times)

0 Members and 1 Guest are viewing this topic.

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
S2000 backlit reel bulbs information needed
« on: October 07, 2018, 06:11:40 PM »
I’m working on a 5 reel s2000 and I have reel bulbs burnt out. They say CLM F2 14V 3WX but no numbers?? I have a bunch of 14V #658 but they seem too dark. Anyone know where a #658 is used. I also found this fluorescent bulb in this machine with this writing on it, Casino Products.. Was this a bulb Co.?
Logged
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline RB

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3474
  • Reputation Power: 351
  • RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #1 on: October 07, 2018, 06:32:26 PM »
658 is for the buttons. I usually replace those with LEDs. Yes they are dimmer than the 359X reel lamps.
Logged
Quality doesn't cost. It pays.

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #2 on: October 07, 2018, 06:52:07 PM »
Quote from: RB on October 07, 2018, 06:32:26 PM
658 is for the buttons. I usually replace those with LEDs. Yes they are dimmer than the 359X reel lamps.
Thanks Ron. I was thing 259 for some reason.
Logged
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline RB

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3474
  • Reputation Power: 351
  • RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #3 on: October 07, 2018, 06:57:04 PM »
259 lamps are 6V. You might find those in a S Plus.
Logged
Quality doesn't cost. It pays.

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #4 on: October 07, 2018, 07:01:39 PM »
I just remembered where they go. They are for my early Bally V2000 poker games.
Logged
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline DAVEdetroit

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 27
  • Reputation Power: 3
  • DAVEdetroit New User has no influence.
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #5 on: October 08, 2018, 05:41:29 PM »
Quote from: Amechanic on October 07, 2018, 06:11:40 PM
I’m working on a 5 reel s2000 and I have reel bulbs burnt out. They say CLM F2 14V 3WX but no numbers?? I have a bunch of 14V #658 but they seem too dark. Anyone know where a #658 is used. I also found this fluorescent bulb in this machine with this writing on it, Casino Products.. Was this a bulb Co.?


Are You looking For the Florescent TUBE?


Or the The Bulbs BEHIND The Reel Strips?
Both Are Available From SPININC  In Florida


The Bulbs Behind The Reel strips--Are A Different Number Then the Ones For The Buttons





Logged

Offline Paul

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 689
  • Reputation Power: 49
  • Paul Might someday be someone...Paul Might someday be someone...Paul Might someday be someone...Paul Might someday be someone...
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #6 on: October 08, 2018, 06:14:19 PM »
If your looking for the bulb in the picture then
search for the " F14T8CW " and you'll get the same bulb.
Logged
1st rule of electronic repair.
"Thou shall check voltages"
⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #7 on: October 08, 2018, 06:23:33 PM »
I have fluorescent bulbs.. I was referring to the wording on the bulb.. I have figured out that the wedge bulbs for the backlit reels are 359X. I wish Spin listed bulb numbers, not just the bulbs specs..
Logged
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline sixcardmark

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3902
  • Reputation Power: 240
  • sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #8 on: October 08, 2018, 07:08:15 PM »
I use spins 12v LED's in s2000 5 button decks and back lit reels.  I also use either LED strips in place of fluo tubes or use the 6500K /D daylight tube instead of 4100K /CW cool white.
Logged

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #9 on: October 08, 2018, 07:51:20 PM »
Quote from: sixcardmark on October 08, 2018, 07:08:15 PM
I use spins 12v LED's in s2000 5 button decks and back lit reels.

So you use the same large LED bulbs that are used in the deck buttons, for backlit reels?  As for the fluorescent bulb pic I posted, I was just wondering if anyone had seen this on a bulb before? Casino Products?
Logged
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline sixcardmark

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3902
  • Reputation Power: 240
  • sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #10 on: October 08, 2018, 08:43:38 PM »
Quote from: Amechanic on October 08, 2018, 07:51:20 PM
Quote from: sixcardmark on October 08, 2018, 07:08:15 PM
I use spins 12v LED's in s2000 5 button decks and back lit reels.

So you use the same large LED bulbs that are used in the deck buttons, for backlit reels?  As for the fluorescent bulb pic I posted, I was just wondering if anyone had seen this on a bulb before? Casino Products?
Yes I do. 

No I have not ever seen that brand.  Wow, I use the 15w F15T8/D, didn't know they made a 14w version.  May check out the F14T8/D, they should be a tad brighter.  The 6500K's (D) look more like LED's.
Logged

Offline Tilt

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4449
  • Reputation Power: 386
  • Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!
  • Gender: Male
Re: S2000 backlit reel bulbs information needed
« Reply #11 on: October 08, 2018, 08:55:12 PM »
F15T8 tubes are 15" long, F14T8 are 14" long.  Be careful or you'll end up an inch short  :fryingpan: .
Logged

Offline sixcardmark

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3902
  • Reputation Power: 240
  • sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #12 on: October 08, 2018, 09:28:31 PM »
Quote from: Tilt on October 08, 2018, 08:55:12 PM
F15T8 tubes are 15" long, F14T8 are 14" long.  Be careful or you'll end up an inch short  :fryingpan: .

F15T8 are 18" long, 15w.  The F14T8 are 15" long 14w, so can't use those, would be 3" short lol  (That's what she said.) 

Why was that Casino products F14T8 even in the machine?

Logged

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #13 on: October 08, 2018, 10:08:19 PM »
Quote from: sixcardmark on October 08, 2018, 09:28:31 PM
Quote from: Tilt on October 08, 2018, 08:55:12 PM
F15T8 tubes are 15" long, F14T8 are 14" long.  Be careful or you'll end up an inch short  :fryingpan: .
F15T8 are 18" long, 15w.  The F14T8 are 15" long 14w, so can't use those, would be 3" short lol  (That's what she said.) 
Why was that Casino products F14T8 even in the machine?

It might not have even come out of a S2000 or IGT... I work on older Bally’s too. I thought is was just an interesting question about the history and company, and wondered if anyone had ever seen a bulb with these markings before.. My original question was about the backlit reel bulbs numbers. 🤔🧐 I need to find my LED bulbs to try them in reel #1 tomorrow to see how they work. The reason I didn’t think they would work is because the reel bulbs stay lit at all time, but just at a low glow until you hit a winning combination..
Logged
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline sixcardmark

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3902
  • Reputation Power: 240
  • sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #14 on: October 09, 2018, 05:20:36 AM »
You have to install the sockets into the reels first, then insert the LED bulbs into the sockets. You can't get the sockets installed with the LED's already in them.(if that makes any since).  You also have to get the polarity in correct direction.
Logged

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #15 on: October 09, 2018, 05:42:00 AM »
Maybe I’ll just stick to the bulbs. I don’t feel like pulling reel strips today to install LEDs.
Logged
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline sixcardmark

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3902
  • Reputation Power: 240
  • sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #16 on: October 09, 2018, 05:48:04 AM »
I just pop the c-clip off and remove the whole reel off the base.
Logged

Offline rockymountainslots

  • Resigned NLG Member
  • New NLG Member 3 to 100 Posts
  • *
  • Posts: 79
  • Reputation Power: 16
  • rockymountainslots New User has no influence.
  • Gender: Male
  • NLG
Re: S2000 backlit reel bulbs information needed
« Reply #17 on: October 09, 2018, 06:28:27 AM »
Ive been using 161 bulbs for years they work great
Logged

Offline Tilt

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4449
  • Reputation Power: 386
  • Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!
  • Gender: Male
Re: S2000 backlit reel bulbs information needed
« Reply #18 on: October 09, 2018, 07:55:33 AM »
Quote from: sixcardmark on October 08, 2018, 09:28:31 PM
Quote from: Tilt on October 08, 2018, 08:55:12 PM
F15T8 tubes are 15" long, F14T8 are 14" long.  Be careful or you'll end up an inch short  :fryingpan: .

F15T8 are 18" long, 15w.  The F14T8 are 15" long 14w, so can't use those, would be 3" short lol  (That's what she said.) 

Why was that Casino products F14T8 even in the machine?

I stand corrected.   :hail:
Logged
Pages: [1]   Go Up
« previous next »
 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**


           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.

New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442



Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:


This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal