Bally e-series

[filounet]

Hello,

My machine works when I put a token but goes into default after blocking the last roll without even making a payment if necessary.
I checked connectors, fuses, pins, memories 5101, tests via the hooper from 1 to 6 work
The cards are well fed in 5 volts
I have several machines e-serie but there I do not see
At the top of the box, there are two cards I do not know, an AS-3130-1 card and an AS2518-110 card
Do you have an idea ?
Thanks Filounet

[filounet]

Hello,
When I put in test mode 8 and I play, it is good 81, 82 or 83 according to the number of pieces played and shows the gain on the screen but does not pay
It allows me to replay in this test mode and as soon as I go into real game, again it hangs at the end of the game and the top lights blink.
Some pictures of the machine, thank you for your help

[filounet]

another one.

[filounet]

I have the impression that the machine always indicates the door open, the code 50000 is still present even if I connect live both son of the switch of the hinge and I play.
At which level can there be information not present for closing the door?

[Badbaud]

Try replacing U17 on the I/O board.

[Amechanic]

Does that game still have the switch by the door lock? I alway by pass that switch. It is wired in Series with the door hinge switch.

[filounet]

Hello, yes the problem was good on the lock switch of the door, I realized yesterday after my post that it was unsolded but made contact with the metal of the door
Thank you and nice day