Am I outta luck?

[Joopers7]

So I have this S2000 504 board that the battery leaked on and destroyed the board.  Im having a REALLY difficult time finding one of these.  Is there ANY other board that will work?? If I can't find one did my S2000 just become useless....thanks for any help.

[therockinelvis]

You can use a 502 board also. Reach out to member RB. I think he has some

[RB]

I do not have any 50x MPUs available. You can use a 1270x Enhanced MPU but you will have to swap the motherboard to match the 1270.

[therockinelvis]

Sorry Ron.

[qbert]

Is your machine a vision or Reel Touch?
On the Reel Touch you can use a 502 rev A board without fear of the hum because the sound comes from the top box. I'm pretty sure vision is the same way.

[Joopers7]

Reel......something a little weird happened tonight. I super cleaned the board,   now its acting like it wants to work. I need a new reset chip. Its on the way. Ill keep everyone posted. Im trying everything  possible before I spend $$ on a new board.

[Retro tech repair]

Is your machine a vision or Reel Touch?
On the Reel Touch you can use a 502 rev A board without fear of the hum because the sound comes from the top box. I'm pretty sure vision is the same way.

Just to expand on this every vision i have worked on has used a combination of mpu and monitor sound. Reel touch are completely monitor sound.

[nglayton]

do not have any 50x MPUs available. You can use a 1270x Enhanced MPU but you will have to swap the motherboard to match the 1270.

Just out of curiosity, I know the 504 boards came out after the 502 boards, but where does the above mentioned 1270x Enhanced MPU boards fit in the timeline? Is it older or newer than the 50x MPU's?

[Tilt]

Newer.