s2000 reset problem

[sh61526]

new game did a clear /key rest now i have a select wamm or ipc what do i do to correct new to s2000

[RB]

Choose WAMM if your key chip will allow it. KEY00045 does for sure.

[Tilt]

Why did you clear it?  You should only clear it if you need to change the accounting denomination.  It returns the machine to factory defaults and creates more problems like what you're experiencing now. It will not fix a hardware problem.

See this post to fix your current issue.

http://newlifegames.com/nlg/index.php?topic=34383.msg181799#msg181799

[sh61526]

got that problem fix but the coins just fall through and the bill accepter just flash blue ambulance and second red light on smart bezel

[Sunrise Side]

What messages do you see in the Blue VFD display?

[sh61526]

If I first turn machine on i get bill valadator error cycle door goes away but smart bezel has second red light on and flashing ambulance coin mech has green light but coins drop straight through and can’t add credits with white button on optic

[Sunrise Side]

So all the errors clear after you open and close the door 2-3 times and its in ready play mode? The button on the optics will not work by just opening the door and pressing the button. Have you adjusted the pot on the comparitor to the fully CCW position and changed the coin in the comparitor?   Go into your 4 menu and do a Auto Configure.

[sh61526]

Yes you can clear the codes by cycling the door tried new coin and the self test on bill validator will take bolls in and put them in the cash can door ready for coins but won’t accept coins or bills it finds the bill validator on the auto configuration

[sh61526]

Thank you to everybody that helped got it all going

[Sunrise Side]

Can I ask what you found to fix it?

[sh61526]

I did a clear/ key again and reset everything back up the only thing that didn’t work is it won’t take coins yet but it will take bills and plays fine

[Sunrise Side]

OK Thanks!!