91
IGT S2000 and Vision Games / Re: S2000 after acting weird after using keychip
« Last post by lookes on May 05, 2024, 08:42:25 AM »Remember you can't have any credits on the machine when key chipping. Key 45 would be your best bet.
Welcome to the NewLifeGames.com message forum!
|
91
IGT S2000 and Vision Games / Re: S2000 after acting weird after using keychip« Last post by lookes on May 05, 2024, 08:42:25 AM »Remember you can't have any credits on the machine when key chipping. Key 45 would be your best bet.
92
IGT S2000 and Vision Games / Re: S2000 after acting weird after using keychip« Last post by sixcardmark on May 05, 2024, 08:26:06 AM »Try using either a key 31 or 45. Key 17 is for game king.
93
IGT Reel Touch Games / IGT REELTOUCH Waiting on video display HELPPPP« Last post by Willlee3 on May 05, 2024, 08:17:55 AM »While playing the machine the print voucher button was pressed causing the printer to throw a out of paper code open the door pull the printer out and replace the paper and after open and closing the door 4 or 5 times it finally cleared the out of paper code and when I shut the door the last time it automatically rebooted the machine everything seemed to start perfectly fine then in the middle of starting up the video display shut off and bottom screen got stuck reading please wait and after 20 or so minutes I turned the machine off and back on and now get waiting on video display and sometimes video passed self test but nothing happens
94
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: WTB: IGT S+ "SPIN REELS" and the "PLAY CREDITS" buttons« Last post by RobinAK on May 05, 2024, 07:15:10 AM »These are at spin if you cant find OE buttons. https://www.spininc.com/button-set-igt-s-slots-2-x-rectangle-3-x-small-square-with-63v-bulbs-decals Well darn. I'll try to go through my scrap parts later today & see if I have any. I don't think I do but ya never know. 95
IGT S3000 Reel Games / Re: IGT S3000 pinball touchscreen calibration« Last post by Gasman on May 05, 2024, 06:20:03 AM »Hi, Thanks!
That did it. Appreciate your help. 96
BALLY Game Maker / Could use some assistance on my gamemaker V7200« Last post by SkyPilot on May 05, 2024, 02:29:00 AM »Hi Guys, Sorry if this has already been asked but could not find a match when looking.
I added a new game to my newly acquired V7200 and cleared it with setting both, switch 7 and 8 (I know, I screwed up and should've just hit switch eight). I am trying to get the machine back to working normal and don't know what setting I needed to do on setup. i am sending an image of the choices I selected. i have no printer in this machine. Problem is, playing is free, doesn't accept pay for game play nor does it allow the hopper to pay on winnings. i would guess it's quite an easy fix, but with the very limited knowledge I had so far, I am at a loss. I thought perhaps it was the choice made in the "Residual Credit Model, I've tried both, "No Gamble and no Attend" as well as "Gamble and Attendant pay" Thanks so much for your help!! I will keep my CLEAR chip handy... Best to you all! 97
Universal Reel/Video Games / Re: universal slot machine jam« Last post by bidault on May 05, 2024, 12:11:01 AM »The power is on and there is no voltage on the wires to the coin comparator. the green led is not lit. The connector is perfectly clean.
98
IGT S2000 and Vision Games / Re: S2000 after acting weird after using keychip« Last post by Newbooty on May 04, 2024, 09:33:10 PM »I just put a $20 through the bill validator. It spun once and used 3 credits. All buttons are working as they should as long as there is credit on the credit meter. Now here is the kicker. I put 3 coins in with the credits from the $20 still showing on the credits. When I drop the 3rd coin the reels spin.
99
IGT S2000 and Vision Games / S2000 after acting weird after using keychip« Last post by Newbooty on May 04, 2024, 09:22:30 PM »hello,
So tonight I tried to use a keychip 00017 that I bought from of ebay to change the payout on a 501 board. This is a triple-triple diamond 3 reel. The first attempt said access to the keychip failed. The second time I had access to the menu, but I had no access to menu number 7.1.2. The only option was the denomination setup. So i thought I am going to just put reboot the machine and post on the Forum. The machine rebooted and immediately spun the wheels and paid out about 6 coins. Now when I put 3 coins in the reels automatically start. The bet 1 credit is not available at all when putting coins in. If I win credits then everything works normally, until I have to put quarters in. Also weird is that the Play Max credits do not light after putting 3 coins in. The wheels just spin. Thanks for your help 100
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: WTB: IGT S+ "SPIN REELS" and the "PLAY CREDITS" buttons« Last post by David Walz on May 04, 2024, 07:09:06 PM »What's wrong with yours? The two I am looking for have broken plastic pieces inside. |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |