21
IGT S2000 and Vision Games / Re: S2000 Vision Ms. Little Green Men startup issues
« Last post by MB75 on Today at 11:38:53 AM »Thanks, can you point out what components are involved ?
Welcome to the NewLifeGames.com message forum!
|
21
IGT S2000 and Vision Games / Re: S2000 Vision Ms. Little Green Men startup issues« Last post by MB75 on Today at 11:38:53 AM »Thanks, can you point out what components are involved ?
22
IGT S and S-plus Reel Games / Re: IGT 25¢ coin heads« Last post by David Walz on Today at 10:45:20 AM »More confusion.
The one on my IGT is 1$ and I need to change it to 25¢, however it doesn't have the two spikes on the bottom. 23
IGT S and S-plus Reel Games / IGT 25¢ coin heads« Last post by David Walz on Today at 10:41:28 AM »25¢ Coin heads....
What a can of worms. I am trying to figure out what is the correct one for a S-Plus. Some have spikes on the back side, some are low on the top, Some are in different positions for the coin to drop left, right, center.. 24
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Reel Strips Triple Stars« Last post by lowlimitlootlane on Today at 10:15:35 AM »I was looking for these strips a few weeks ago, I ended up finding some. I think the user MazzMayhem has some backlit strips.
25
JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators / WBA-21,23-SS Canadian update?« Last post by RED7 on Today at 09:54:35 AM »Good day!
Curious on how I can update a couple Canadian bill validators. Three different machines S+ S2000 and Bally S6000 1 x WBA-21-SS 2 x WBA-23-SS (One labeled 4 MEG on chip, other 1 MEG) They were all flashed 10 years ago i believe, Friend of mine had me get these machine up and running but the bill acceptors will only accept older paper money vs the new fancy plastic. Best way to go about this? Send them out to someone? Buy new Chips? Although I am familiar with the main machines, I never got involved with bill acceptors, machines I bought came with USD ones i just removed them. Used free play.. Located in Ontario.. Thanks in advance.. I can head back out to machine to acquire more information if needed.. Steve 26
IGT S2000 and Vision Games / Re: S2000 Vision Ms. Little Green Men startup issues« Last post by lookes on Today at 09:51:41 AM »U79 is not needed for door circuits. You have a missing signal called Interrogate. All door circuits have this signal in common. Your board will need to be repaired, or replaced.
27
IGT S2000 and Vision Games / Re: S2000 Vision Ms. Little Green Men startup issues« Last post by MB75 on Today at 09:34:12 AM »hi,
so I decided after a couple of weeks to have another look at the machine. It seems that im missing 4,5 V on the door optic. No broken cable but no output on J19 Pins 3 and 4. Could this have something todo with U79 that I have removed for example that U79 is still mandatory ? Hope you can help a little bit so I get this one running. Thanks 28
LCD and CRT Monitor Repair Tech Support / Re: IGT 701 Draw poker with video problems« Last post by Asurber on Today at 05:49:12 AM »It sure does, I got 4 queens last night.
29
Universal Reel/Video Games / Re: universal slot machine jam« Last post by bidault on Today at 04:12:08 AM »i did all you told me and the code 12 appeared agai as you can see. I will check the solderings to be sure.
30
IGT PE and PE Plus Poker Games / Re: Help request with PE+ CRT to LCD conversion pls« Last post by LuckyDog on Today at 03:53:25 AM » From your picture, I would think the chip you need to swap out would be U49. Layout wise, that part of the circuit looks to be the same as my US based PE+ board. I'd suggest tracing one of the video lines back thru the output transistor to the IC just to be sure. Please let us know how this turns out for you.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |