Hi everyone,
I wanted to change the Denom on my S9000 Alpha Stars & Bars QH. Everything has been working fine, it was just set to 25c and I wanted to change it to $1. No issues, plays great, fun game, not a single problem. No big deal right, but a clear is required. While doing this process, I changed all 3 batteries as well, they were reading sub-3v so out they went. So I get the 312 Clear CF from RB (known good source of course) and run the clear. The NVRAM fails. I try this several times unsuccessfully. Each time, each boot, the NVRAM fails (see pic). So then I boot the machine back up on the original OS/Game CF cards and that now fails too. Pics of error attached. Again, no issues with the machine AT ALL until I failed on the clear. It is the 317 OS and I used a 312 Clear chip. What would cause the NVRAM clear to fail? What the heck do i do now? This is the 512mb MPU 300mhz.
Thanks for any and all help, as always!