Bally ALPPHA Diamonds and devils set up help need

[trashman]

So, after doing everything I had to the game now, I'm lost as to setting game up. I watched a you tube video and got idea as to setting machine up.so i can only get it to play 3 credits. I don't know what to set the denomination and other setting to or if i even have to. Any help will be appreciated. Here is some pics of my setting. Thanks bob!

[coolwavepic]

On your button panel you have two rows of buttons? The top row selects the lines. You have only 1 line selected.

If you have 1 row of buttons and a smash button (oval repeat button) you will not be able to max bet on the lines. I have an alpha like this and I had to wire in a dummy button to activate the max bet which will activate all the lines.

[trashman]

i have to rows.

[coolwavepic]

You will need to ram clear and when you setup the game you need to select 25 lines... right now you have 20 selected. So if you hit your button that says 25... it will actually select 20 since thats how its setup. You can not change this unless you ram clear. Then setup again.

Once you have set everything up and run for the first time you need to select 25 lines and then play. The older games default to 1 line when first setup.

Why are you not able to select more lines? Are your buttons broke??

[trashman]

i dont know i got this machine from a guy that got it out of a storage unit.it been kind of been a night Marr for me.is there a self switch test on these machines to tell you if there working or not or do you just test them with a multimeter. thanks bob. 

[coolwavepic]

Go into the Diagnostic menu. you should see something like I/O (cabinet or door, I cant remember. If you press a buttons on the deck it will change from 0 to 1.

Is the game running when you close everything up? In the button setup menu did you choose 16 buttons? If not thats why you can select the lines. Ram clear and resetup

[trashman]

thank you.