11
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION
« Last post by David Walz on Today at 12:30:02 PM »On to cleaning up the encoder. The encoder had a $1 set up, I changed it to 25¢. I don't know if this will work, but I will give it a shot.
You would normally have to:
1). Change the black plastic encoder coin guide to one that has the guide to force quarters to the left, so they fall between the infrared beams of the ABC optics.
2). Swap the coin head on the door to where the coin slot is smaller.
3). Install a larger diameter wheel shelf on the coin hopper plate where the quarter would sit higher up to be read by the hopper optics, and re-adjusting the wheel knife to sit on top of the shelf.
Yes, it was a $1 slot machine in a former life. It's been reincarnated to a quarter.
I changed out the quarter encoder guide, however I don't know if the electronics are going to function.
The quarter coin block is coming in the mail from Lisa a forum member.
Alan from K-LAR is getting me a quarter coin comparator ready to go, as we speak.
The quarter hopper is being sourced from Jim at Midway Slots, it should be ready to plug in when I receive it.
And a partridge in a pear tree.