Project machine. New here.

[rokgpsman]

.....The chips are SP709 and SS4780.  RB is sending me new strips (and a different chip) for this machine. They're very brittle and the silver spangled aspect of the reels are peeling in certain spots.

Thank you!

Which new chip are you getting, is it a higher percentage SS chip, or a different SP chip?

[Talarspeed]

.....Which new chip are you getting, is it a higher percentage SS chip, or a different SP chip?

I'm getting an SS4779 and SP1137





(edit to fix quoted portion of post)

[Talarspeed]

I can't find a PAR for SS4780 (anyone else have one?).  This is the reel strip listing for the SS7752 chip, which is similar to yours and may use the same strips.

This reads from left reel to right reel.  Symbols are:

~~ - blank
1B, 2B, 3B - single, double, and triple bar
7 - Red 7
TD - Triple Diamond

Line #   1 ~~ ~~ ~~     
Line #   2 1B 2B 1B     
Line #   3 ~~ ~~ ~~     
Line #   4 TD TD TD     
Line #   5 ~~ ~~ ~~     
Line #   6 2B 3B 2B     
Line #   7 ~~ ~~ ~~     
Line #   8  7 2B  7     
Line #   9 ~~ ~~ ~~     
Line #  10 1B 3B 1B     
Line #  11 ~~ ~~ ~~     
Line #  12 3B  7 3B     
Line #  13 ~~ ~~ ~~     
Line #  14 2B 1B 1B     
Line #  15 ~~ ~~ ~~     
Line #  16 TD TD 2B     
Line #  17 ~~ ~~ ~~     
Line #  18 1B 2B 1B     
Line #  19 ~~ ~~ ~~     
Line #  20  7 1B  7     
Line #  21 ~~ ~~ ~~     
Line #  22 3B 3B 3B

Thank you for posting this- very helpful!

[Shaggy]

You'll like the SP1137. I'm running that in my T/D and have it set to 99 credits per coin. When you set the machine to token credit, it automatically sets the credit limit to 9999. You can get a bunch of credits for not too many coins.

Dave

[Talarspeed]

I installed new reels strips which look much nicer than the old ones. This also solved the payout problem at the 3rd reel since it was incorrectly installed.


I'm going to finish the cosmetic cleaning of the machine and work on cleaning up the hopper (although it works).


The machine basically works except for no sound. The struggles with this are posted in separate topic about the toggle switch.


I'm also building a basic stand which I'm documenting for now. Once it is complete I will post that in that particular forum area. Once this all is finished, I will post pictures.

[rokgpsman]

Thanks for posting the update. So the 3rd reel strip was the proper one, it just was not installed on the reel correctly?

[Talarspeed]

Thanks for posting the update. So the 3rd reel strip was the proper one, it just was not installed on the reel correctly?

Yes. It wasn't even close. I like to have a beer while working on this machine, but the previous person had way too many!