81
« Last post by KAHUNA21 on May 17, 2024, 11:16:17 AM »
I live in Southern California and bought a old Johnson Fare Box to restore. The drawer on the front which is "Suppose" to pull out will not come out. I was referred to some who lives close to me and they quit trying to help with when they got frustrated and could not get the drawer out after having it for 6 month. Any help would be greatly appreciated, the glass top has been removed, so it's just the base. Here is a picture of what will not open...
82
« Last post by Ocitown on May 17, 2024, 10:59:33 AM »
Before I completely locked up the last time when I was in gameplay, and the last thing, it was allowing me to do was push the button for other games, and the only thing that changed on the screen was my credit, and it changed from Credit $99.98 to bold letters of credit with just the numbers 9998.
83
« Last post by Ocitown on May 17, 2024, 10:56:42 AM »
I’d like to give an update because I did get the machine up and running for a while before I assume it’s the board and send it out.
So I replace the MPU fan and cleared the Ram like I’ve done a dozen times I was able to get a screen which at this time, only said verify all options before putting machine play and gave me an OK button to push which open the game play.
Was able to play the game video poker for a while until it again locked up with the low battery message.
With any of this new information point to a problem other than the board?
Is sending the board out the solution or is it just a possible solution?
Again, thanks for all the help.
84
Other side of S5500 BV harness at backplane
85
It looks like the grey wire from J2 position 2, goes to J13 #1 position?
86
« Last post by David Walz on May 17, 2024, 10:17:50 AM »
S5500
I can barely see the back side of the plug. That's the one that I need to reconfigure. Thank you.
87
May 17th - Price Reduced! - The buttons are sad that they don't have a new home yet! The 7 no image, but working buttons are still available. See below.
$16/button - 7 No image, but working $15 Shipping
If all 7 buttons are purchased together, I will drop the price to $112 shipped. PM me if you're interested.
88
« Last post by David Walz on May 17, 2024, 10:12:17 AM »
S5500
That band aid finger photo looks mighty familiar.
89
« Last post by David Walz on May 17, 2024, 10:10:35 AM »
Only difference I seen in your schematic is the BV reset button.
So my J16 harness is basically wired correctly.
|