Can you identify this machine bought last week I read replace button batteries may get the top screen to work well took out 1 in on board in brain box and 2 at top of brain box one was 2.90 others were 3 v put them back now machine won’t power up on the good lower screen I just hear beeps yellow flashing lights on motherboard and solid row of green lights. The name tag is missing on the right side. Here is some photos & #s I found inside.Found this sticker on inside looks like a bar code 100001924417 TLAVP 412504 ON BRAIN BOX was  model 50062500W serial # 21810249 5-1-12 did see some dates inside the cabinet looked like 2008. Now it’s a 250 lb paperweight please help or send me in right direction I can’t figure how to post on forum.  Can’t see where to add pictures I can send them to your email.

I need game chips for Blazing 7's  3 coin.
I also need newer mains so I can install tito.

If you're looking for the multi-denom decal, then here are 2 simple places to start. What denom values are you looking for?

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=igt+multi-denom&_sacat=0&_odkw=igt+s2000+multi-denom&_osacat=0

https://get-t.net/product/igt-s200-touch-denom-pad-w-control-board-and-brackets-complete-door-kit-gett-part-td100/

Error "41" is the 1st Reel is spinning improperly. Could be a couple of things; the reel motor bearings are stiff or the electrical connections are oxidized and not making a good connection. Use will free up the reel bearings. The three white Molex plugs at the front of the reel tray though should be unplugged and plugged back in several times to improve the connections. Cleaning the plugs with some Deoxit spray certainly wouldn't hurt either.

Another possibility would be the edge connector on the backside of the CPU board. Same applies, check for bent pins and clean with Dexoit spray.

Resetting an Error 41 with the yellow reset button is the correct response.   

More parts installed, labeled parts.