21
Welcome to the NewLifeGames.com message forum!
|
21
IGT S2000 and Vision Games / Re: Upgrade from 501 board to 504?« Last post by Stayouttadabunker on Yesterday at 09:23:26 PM »22
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally Alpha 2 Denom removal« Last post by PDuble on Yesterday at 09:22:55 PM »That's what I thought. Thank you.
23
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: WTS - MEI Cashflow sc6602u Bill Validator Completes for IGT S2000 & SAVP« Last post by NorCal Slots on Yesterday at 09:09:08 PM »Yes I’ll send a pm now with contact info
24
WMS Williams Video / Gamefield touchscreen displays vertical but touch controller is mapped horiz?« Last post by sccarlso on Yesterday at 09:01:47 PM »I’ve been doing trial & error for days to FINALLY get Ironman to load and be able to get through initial configuration on a BB2E with an upgraded NTX3.2 CPU. I removed both screens and have a 32” NEC display for the top, and I purchased an actual GamefieldxD touchscreen for the lower screen.
Jumpers are set and the cabinet type shows it as a GamefieldxD cabinet. I finally figured the biggest issue, not being able to get through setup or calibrate the touchscreen is because the Gamefield touchscreen being key mapped horizontally when the game is a vertical touchscreen! With it that way, it took many tries to setup, as for whatever reason, I could only get touchscreen response when the setup screen was on the top display, while touching the Gamefield touchscreen with the wrong resolution. I finally just started marking what was where on the touchscreen to match the setup menus as it was horizontal but displayed on the other vertical non touch screen. But after finally getting a basic setup, everything initialized and both screens are vertical as they should. But the Gamefield touchscreen remains mapped horizontally! On touchscreen calibration it displays the hash marks in the proper locations for a vertical screen & responds. But calibration does little as the touchscreen itself thinks it’s horizontal while the video is being displayed vertical! Took me forever to figure out what it was actually doing. But I don’t have any doc or info if there’s a dip switch, jumper, or other setting might be that changes that. As the display knows its vertical & outputs video oriented properly, the touchscreen itself doesn’t seem to understand it’s a vertical format. Anyone know where or how that might be switched? There’s no setting in the game itself, so wondering if it’s a jumper setting on the backplane? Or a switch somewhere on the Gamefield screen itself? It’s an OEM screen for a Gamefield machine so it’s designed to be a vertical touchscreen. Everything else functions as it should. All that remains is for the touchscreen to respond where it should. Is the touchscreen controller itself configured to map vertically or horizontally? Or is this controlled by the OS & game? I read a few general docs on touchscreens and many said the touchscreen manufacturer sets this in the touch controller. If it’s a hard coded setting in the touch controller whether it’s in portrait or landscape mode, then Ceronix screwed it up! The screen is designed for a Gamefield. So the touch controller has to be formatted in portrait mode if it’s set on the touch controller itself. Or the EDID that’s programmed on it from general touchscreen information I read tells the CPU that its touchscreen is mapped in portrait mode. Has anyone experienced this where a touchscreen that is vertically displayed thinks it’s horizontally mounted? If so, do you know how that can be switched so it functions properly? If it even can? Thanks! 25
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: WTS - MEI Cashflow sc6602u Bill Validator Completes for IGT S2000 & SAVP« Last post by TheZode on Yesterday at 08:58:48 PM »I would be interested in one for an S2000 if still available.
Thanks, John 26
IGT S2000 and Vision Games / Re: Upgrade from 501 board to 504?« Last post by Newbooty on Yesterday at 08:54:18 PM »That makes allot of sense. I was looking at the old site today and i found the S+ bible and it listed triple triple diamond as an S+ game. So as a neewbie, what does that mean?
I take it the SS chip changes the payout percentage on S+ boards? What is the SB chip? Will the Clear IVC224 and the Key 45 still work? I have a 45 key on its way, but from what I am hearing is that it wont work with the current chipset. If not could I upgrade the board? Did I mess something up when I used the 00017 key? I still have the same problem from my other post where the reels start automatically after the 3rd quarter is dropped. This started after trying to use the 00017 key. Sorry for all the questions. I am just trying to make sense of how this all works. Also, I asked in a prior comment if there is a definitive guide to the boards. I think that was the wrong question. What I meant to ask is if there a guide that lists the differences in each board and what chips they can use. Like i didn't know until today you can use S+ on a S2000 board. If there is documentation somewhere please point me in the right direction. I feel bad asking these basic questions. Thanks again for all your help, Newbooty 27
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: reel strips for sale« Last post by TheZode on Yesterday at 08:45:55 PM »Hi Jim, any chance you would have backlit Triple Double Diamond Deluxe With Cheese, 3 reel set?
Thanks, John 28
BALLY Game Maker / Re: Game Maker 7200, Hot Hot Hot setup issue« Last post by Chris-socal on Yesterday at 08:32:54 PM »The blue screen with the setup details?
Thats a good thing. Turn the key 29
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Yesterday at 07:57:24 PM »I think that I am totally confused. The MPU is working great, however I don't understand what game this is all about.
30
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Ballys V32 Slots machines for sale Roulett,Quick pick and« Last post by robdman on Yesterday at 07:48:16 PM »Another picture!
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |