Yes, that black button on mpu is the reset. You can also try the yellow reset at top right corner of the open door after leaving it on for a minute.

Up for sale is a Gen2 printer that has come out of my S2000 machine. It works and prints tickets clearly, however, please see the link below. This is a thread that I started in regards to the issue this printer has. While the ticket will come out eventually most of the time, it does jam. Could possibly be rollers or rubbers or something, I really don't know. I decided not to do any repairs to it and ended up purchasing a refurbished printer and harness to replace this one... and the replacement has been working perfectly in my machine. As you can see in the photos, the outside of the harness was apparently shredded a bit when I bought it. What you see in the pictures is what you get. The sliding piece on the bottom of the printer is included too. I am asking $70 shipped. If you're interested, then PM me. Thanks.

https://newlifegames.com/nlg/index.php?topic=42038.msg

I got some, Thank you!

Sent you a PM

The games are fussy and don't always tell you whats wrong - mostly if the bet/lines and other bits are not compatible for the game it will complain when it loads up etc.

There are a few ways to solve this, going from the working photo, it's a 3 line $1 game. (or at least that seems to work).

There are a few ways (Besides trial and error) load the game as normal, in Audit screen:

-> Operator Setup/Selections - > Bet/Line Denom Settings

See what options are highlighted, you should see 3 lines by x bet. (that matches the working game, otherwise, it might support other lines).

Then put the set chips back, clear the memory and then set it to that (or one of those), put game chips back in and then it should let you clear the ram and just setup the game as usual.

If it's still not happy it might be something else, check set the version of the set chips to the one 4.04.xx in the Machine Identification.