bally 6000, code 2.3 . paper chart on door says diverter error. game as coin in, a hopper. has a slot for a ticket printer and a print ticket button, but no printer. as usual, they said it used to work. has new good battery, first presented with an 88ff code. all the dips on dis1 were on, odd. turned them all off except 8, put in clear mains. the game clears, but on start up shows a 2.3 error. with that, the diverter clicks ( moves) 4 times, then its over with a code 2.3 . bill acceptor powers up. as i write this, i remember ticket printer units cant use leave in mains, which they are now. . could that be the issue, do i have to clear with clear chips, and replace the old mains? i also remember you have to make sure of some 11d settings for the coin unit and hopper. i dont remember the settings, or even how to get to 11d. i guess the diverter clicking is a test, but how does it know? there is no apparent position sensor on the diverter. as always, thanks