Best BV for an S-plus

[wallbanger]

I know this will probably turn out to be a matter of opinion but,  I have 4 s+ machines with 10MHz boards and all have different BV's.  Looking to make them all the same.  What is the most reliable, updated(new 5,10,20's), and best valued BV for these machines?  I have a
DBV 145-ss-6036-b022,
DBV 200 ver, 2.40-04-03,
WBA 13-SS chip 21-SS,(not taking any bills yet)
and a ZT-1202

I'm thinking to upgrade the WBA 13(with what chip?) and just change out the rest. What problems will I run into?  Power supplies? Cables? ect.?

[rickhunter]

The WBA 12/13 would be your best option.  The last available update for these accepts up to the colored $5, it will not accept the colored $100. 


You will need to change out power supplies and cage with harness.  I also seem to remember that the openings for the DBV are different for different model validators, but someone here would need to verify this.  I believe the issue is with the DBV line of validators changing them to WBA, but like I said before, someone would need to verify this for me as I am not 100% sure about this.