Payout trouble Bally Super Continental

[Denmark]

Does all the wiring appear original, or is there newer looking wire in the machine?

It's original wiring.

I would say that some of the Yellow wires in the picture of the topshelf dosent look original .
It looks like et ends close to the Odds follower/sealed relay - try to chek it against the blueprints...


Hans

[JanGbg]

Does all the wiring appear original, or is there newer looking wire in the machine?

It's original wiring.

I would say that some of the Yellow wires in the picture of the topshelf dosent look original .
It looks like et ends close to the Odds follower/sealed relay - try to chek it against the blueprints...


Hans

The yellow wire you can see it's only connected around the "credit play" and the sealed relay. Thanks anyway! :-)

[OldReno]

I'm stuck, don't know what to tell you.
The odds follower needs to step the full way, and not stop after 3 or 4.
I dunno....
Maybe Op Bell is still around and can help?

[JanGbg]

I'm stuck, don't know what to tell you.
The odds follower needs to step the full way, and not stop after 3 or 4.
I dunno....
Maybe Op Bell is still around and can help?

There is no problem with the odds follower, it react for every signal.
I wonder how the comparing works?

[rokgpsman]

I'm stuck, don't know what to tell you.
The odds follower needs to step the full way, and not stop after 3 or 4.
I dunno....
Maybe Op Bell is still around and can help?

Op-Bell was last on NLG back in Nov 2015, according to the log.
Hopefully all is well with him, has a tremendous amount of experience.