Author Topic: E2000 (Read 6574 times)

BrianM · « **on:** March 10, 2016, 07:38:23 PM »

Bally e 2000 7s progressive . First coin a light stays lit after handled is pulled. When I place the first coin in, it displays second coin played. Second coins takes it to the third. Third coin in, only first coin in stays lit. Had the boards to Dan for repairs. Believe they are in good shape. Not sure the hopper is paying at the time due to the coin in issue

Has anyone experienced this before?
Thanks for your expertise

BrianM · « **Reply #1 on:** March 12, 2016, 09:37:33 AM »

Photos coin 1 in, coin 2 in, coin 3 in

Sunrise Side · « **Reply #2 on:** March 13, 2016, 12:49:27 PM »

Extra coin will do that. 4th coin goes as a credit to the next game. Just put in 2 coins and pull the handle. See what that does.

BrianM · « **Reply #3 on:** March 13, 2016, 06:14:19 PM »

That seems strange that it would not go to third coin when the third coin is played. In any event. The SM is paying out, unfortunately not properly. I shall do more research. I'm not sure this is due to the battery not being a nicad?

Jon · « **Reply #4 on:** March 19, 2016, 10:11:27 AM »

first question Dan Ellis do you test the boards with the personality prom in them
second question do you have the progressive box hooked up to the machine if not do you have the dip switch setting to shut it off
third question I would like a picture of the coin switch

BrianM · « **Reply #5 on:** March 20, 2016, 07:31:08 PM »

Looked for a progressive box hookup did not see one however was not really sure what it look liked. Tried to search images on the Internet no photos

Dan worked on this board in January

Pays off 60 coins each time. Not based on the reel strips

Jon · « **Reply #6 on:** March 20, 2016, 08:06:45 PM »

I thought we were working on a 2000

Paul · « **Reply #7 on:** March 20, 2016, 09:13:22 PM »

Yea, the tag says E1216.
That makes it a E1000.

GOS · « **Reply #8 on:** March 21, 2016, 02:36:08 AM »

the P1 chip 558989 is for a 5 coin multiplier - your glass and lighting is for a 3 line machine so your lighting will be messed up as well as your payouts

Jon · « **Reply #9 on:** March 21, 2016, 03:56:09 AM »

Brian I am a little confused
what does the tag on the side of the machine say post a picture please
I Googled the E1216 and it comes up as a 6 coin machine
the only image I could find

Jon · « **Reply #10 on:** March 21, 2016, 04:15:45 AM »

GOS?
do you have a good list of personality proms I know the one in my machine is not right the one I have for my machine that has the right. Model number on it does not work
Dellis does not have a listing for this model number

BrianM · « **Reply #11 on:** March 21, 2016, 04:51:44 AM »

Picture of the tag attached. Looks like a 1099. Mistook the 20 as a 2000.
I'm not sure that will help my repair based on the chip issues.
Jon, and other appreciate your review. If the correct chips for this machine is out there could one direct me?
Also looking for replacement of the three line glass. Paint is chipping off

Jon · « **Reply #12 on:** March 21, 2016, 05:01:08 AM »

it helps a lot now we know what chip you need

GOS · « **Reply #13 on:** March 21, 2016, 05:07:30 AM »

supply the strip numbers and I will tell you what P1 chip you need.

GOS · « **Reply #14 on:** March 21, 2016, 09:45:57 AM »

those are an after market (non bally strip) would have to match them to known bally to find the correct game chip or to make one that matches. Need the sequence of symbols for each strip. example 7 bell plum cherry....... for all 3

BrianM · « **Reply #15 on:** March 21, 2016, 06:38:29 PM »

After butter knife surgery I'm posting photos of the reel strip numbers. Appreciate everyone response to this post. Is anyone going to the Chicago show in April? Love to buy some coffees.
Make it a great night

Amechanic · « **Reply #16 on:** March 21, 2016, 08:24:46 PM »

Brian, Send those strip numbers to Dan along with you eprom number in M7..

GOS · « **Reply #17 on:** March 21, 2016, 11:44:46 PM »

the correct P1/M7 eprom for these strips is 571084

BrianM · « **Reply #18 on:** March 22, 2016, 04:41:07 AM »

A big thanks to all, sent the info to Dan this morning

BrianM · « **Reply #19 on:** March 22, 2016, 04:02:40 PM »

Await the EPROM. Will update once when received. Thanks again for the help

News:

NLG Site Navigation Menu

Author Topic: E2000 (Read 6574 times)