New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/
« previous next »
Pages: [1]   Go Down

Author Topic: E1000 error 31  (Read 3493 times)

0 Members and 1 Guest are viewing this topic.

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
E1000 error 31
« on: February 05, 2016, 04:54:15 PM »
ok I hit 800 coins had to reset it nine times kept coming up with error 31 tested the switch at the i/o board it goes closed its open normally should I try A IO bored?
Logged

Online dhellis

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 215
  • Reputation Power: 16
  • dhellis New User has no influence.
  • Gender: Male
Re: E1000 error 31
« Reply #1 on: February 05, 2016, 05:06:59 PM »
An error code 31 is a hopper jam where the roller arm is in the up position to long.
You may need to lube the arm so that it moves freely and/or adjust the switch.
Logged

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E1000 error 31
« Reply #2 on: February 06, 2016, 05:41:06 AM »
even with the switch unplug it gives an error 31 now and then I have swapped the i/o board I am going to hook the meter up and wiggle the wire harness see if I can find a short in the harness I have swapped the CPU board and the i/o board now
Logged

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E1000 error 31
« Reply #3 on: February 06, 2016, 06:22:01 PM »
hey Mr Ellis I'm guessing your Bob Ellis is brother from stagecoach he said his brother lived up in Shasta I have changed every part I ajusted every part on that machine even if I run the hopper out of coins it gives me an error 31 the only other errors I can force it to give me are the reels will spin after indexing
Do I hav the wrong prom?maybe

and he I have some weird plugs hear that Bob wanted for a Parker slot machine he brought up for you to work on foreign if you guys still need those shoot me a message with his or your address I'll go to storage and dig them out and mail them to you

the only good thing is I got the test all the spare boards I got with this machine I have spare everything but what's wrong :hissyfit:
Logged

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E1000 error 31
« Reply #4 on: February 06, 2016, 06:40:33 PM »
just walked in the garage Bob's part is there on the box his first and last name
Logged

Online dhellis

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 215
  • Reputation Power: 16
  • dhellis New User has no influence.
  • Gender: Male
Re: E1000 error 31
« Reply #5 on: February 06, 2016, 06:49:31 PM »
Email sent
Logged

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E1000 error 31
« Reply #6 on: February 06, 2016, 07:02:43 PM »
the machine is definitely a 1213 - 9
the only information I can find on that model says it is a three-line mine is a 5 line
 I have a prom written on that says 1213 it does not work right in the machine the prom I am using that was in the machine when I got it is a 1280 model I will get the numbers off of the Proms for you I may have to get my reader read the prom an attempt to decompile it
Logged

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E1000 error 31
« Reply #7 on: February 06, 2016, 07:22:43 PM »
how to go to the garage and get a beer here's some pictures
Logged

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E1000 error 31
« Reply #8 on: February 06, 2016, 07:23:39 PM »
this is the prom that's in it
Logged

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E1000 error 31
« Reply #9 on: February 06, 2016, 07:25:29 PM »
this problem was on one of the two spare boards that came with the machine the board have the right model number on the bottom of it

the other three memory chips all have the same numbers not a hundred percent sure they're right but what research I have done all the early boards how about all the - 3 boards have those three chips
Logged

Online dhellis

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 215
  • Reputation Power: 16
  • dhellis New User has no influence.
  • Gender: Male
Re: E1000 error 31
« Reply #10 on: February 06, 2016, 08:02:10 PM »
The M1, M2 and M3 chips are all pretty much the same from on E1000 to the next, the variable is
the game chip in M7

I can find nothing at all on the chip numbers in the photos but that may be because I did
find that the Bally E1213-8 thru -16 and -24 thru -24 are all Golden Nugget specials.

Where I would normally have the game chip number and the number of stops listed, they
are left blank in my data.

Logged

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E1000 error 31
« Reply #11 on: February 06, 2016, 08:12:23 PM »
I have a break down like that for en machines toes you wiring diagrams the right glass for the model number who it was made for where it was shipped to what the percentage I'd love to have a copy of your stuff for the E series
Logged

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E1000 error 31
« Reply #12 on: February 07, 2016, 02:38:10 PM »
kiss keep it simple stupid really weird it only errors out every now and then turns out the coin out switch was wired to the normally open terminal it would still work most of the time but that would error out 31 every now and then after exhausting my ambition on this machine I looked at the book one more time and it dawned on me it was hooked up wrong changed it to where it belongs the machine seems fine I will bet by 12:24 in storage is the same problem I'm going to go look at it when I'm done showing my house :banghead:
Logged

Online dhellis

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 215
  • Reputation Power: 16
  • dhellis New User has no influence.
  • Gender: Male
Re: E1000 error 31
« Reply #13 on: February 07, 2016, 02:43:31 PM »
Quote from: ovenguy10 on February 07, 2016, 02:38:10 PM
kiss keep it simple stupid really weird it only errors out every now and then turns out the coin out switch was wired to the normally open terminal it would still work most of the time but that would error out 31 every now and then after exhausting my ambition on this machine I looked at the book one more time and it dawned on me it was hooked up wrong changed it to where it belongs the machine seems fine I will bet by 12:24 in storage is the same problem I'm going to go look at it when I'm done showing my house :banghead:

Pardon me while I smile because no one expects a machine to be wired wrong but it does happen more than we think it does.
Logged

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E1000 error 31
« Reply #14 on: February 07, 2016, 04:35:10 PM »
yes it's hard to imagine such a simple thing will cause something so frustrating really weird though that it would count out the right number of coins every time and only error out now and then I just don't get it I want to go pick up one of my other machines from storage and see if I can force it to do the same thing I am very happy for all the help thanks for coming in and then again I'm going to ship them parts offer your brother tomorrow
Logged
Pages: [1]   Go Up
« previous next »
 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**


           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.

New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442



Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:


This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal