91
IGT S2000 and Vision Games / Re: where to find / s2000 ez play selectable multi denom keypad replacement/solved
« Last post by TheEyeInTheSky on May 02, 2024, 08:48:29 PM »They are great sources! Glad you found what you needed!
Welcome to the NewLifeGames.com message forum!
|
91
IGT S2000 and Vision Games / Re: where to find / s2000 ez play selectable multi denom keypad replacement/solved« Last post by TheEyeInTheSky on May 02, 2024, 08:48:29 PM »They are great sources! Glad you found what you needed!
92
IGT AVP (Including G20,G23) / Re: What type of buttons are these?« Last post by Tilt on May 02, 2024, 08:11:29 PM » Chris and his folks at Slots Unlimited are a class act. OEM originals are getting more and more scarce and $$$ too.
93
Bally Electromechanical / Re: Bally 809-N« Last post by Bruce G on May 02, 2024, 08:02:37 PM »You didn't state the problems the machine is having. Because these are full of moving mechanical and electrical parts, these can suffer from sticky / dried out oil or grease. Parts need to be able to move freely, in order for things to work. These machines are a marriage of electrical and mechanical parts. Relay contacts need to be clean and correctly adjusted with adequate clearance, contact pressure and and over-travel. Buy a GC electronics "contact burnishing blade for cleaning up oxidized / fouled contacts. Never use any form of sand paper on delicate electrical contacts. The hopper also contains moving mechanical electrical components that are prone to becoming gummed up. Check inside the top box, as there may be steppers in there - and those require service as well. The "Jones " plugs on the mechanism, hopper, stepper must be clean and carefully aligned. If not making good contact on all of the pins - some or all features of a game won't work. I use 100% synthetic electric motor oil on these. No detergents in the oil. You can use sewing machine oil, or 3 in 1 electric motor oil in the blue bottle. Do not use 3 In 1 in the red and black bottle, as it contains waxes that will gum up.
94
Bally Electromechanical / Re: Bally 809 belly lamp florescent tube size????« Last post by Bruce G on May 02, 2024, 07:25:55 PM »Thank you so much for taking the time to respond I didn't want to waste money ordering the incorrect length. Now I can get these ordered. 95
Bally Electromechanical / Re: Bally 809 belly lamp florescent tube size????« Last post by caneer on May 02, 2024, 07:05:19 PM »These are the tubes and ballast that I just replaced in my 809 and attached is a picture of the old tubes that came out.
https://www.amazon.com/dp/B00EHK9S02?ref=ppx_yo2ov_dt_b_product_details&th=1 https://www.amazon.com/dp/B00G9BJRH6?psc=1&ref=ppx_yo2ov_dt_b_product_details 96
IGT AVP (Including G20,G23) / Re: What type of buttons are these?« Last post by sakwilla on May 02, 2024, 06:39:54 PM »Cheers
I got them from Slots Unlimited as I trust them completely. Will grab another two then. Thanks for your replies Hopefully these ones will last a while. 97
Bally Reel Games / 5.0.91 error on my Bally s6000« Last post by Coloradonewbie on May 02, 2024, 04:20:03 PM »I cleared the machine and set it up.. I'm getting 5.0.91 error. Any help appreciated
98
IGT AVP (Including G20,G23) / Re: What type of buttons are these?« Last post by Tilt on May 02, 2024, 03:34:48 PM »I had to google translate that
99
IGT I-Game and Game King / Re: igt gameking where is netplex on mother board« Last post by Tilt on May 02, 2024, 03:29:55 PM »It's no big deal. Just make sure the power is off whenever connecting/disconnecting anything. The plugs in the front will only go back on one way, so no worries.
100
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on May 02, 2024, 02:30:51 PM »Still working away, the upper cabinet, glass, light are complete.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |