21
WMS Williams Video / Re: Wns BB2 top box main door
« Last post by Stayouttadabunker on Today at 06:40:43 AM »On top of the bill validator under the deck is a sliding plate that activates the main door microswitch.
When you close the door, the door pushed against that sliding metal plate.
While the door is open, pull on the sliding plate all the out and it will simulate that the door is in a closed state.
If not, follow the two wires from that switch back to the backplane and check the door switch harness for continuity with a multimeter.
All this stuff is in the WMS BB2 Manual in the NLG File System.
If you become a Contributing full-fledged member of NLG, you will have access to it and much other stuff.
Click on photo below to enlarge if needed...>>>
When you close the door, the door pushed against that sliding metal plate.
While the door is open, pull on the sliding plate all the out and it will simulate that the door is in a closed state.
If not, follow the two wires from that switch back to the backplane and check the door switch harness for continuity with a multimeter.
All this stuff is in the WMS BB2 Manual in the NLG File System.
If you become a Contributing full-fledged member of NLG, you will have access to it and much other stuff.
Click on photo below to enlarge if needed...>>>