Hi Guys, at stumbling block again. On this Hopper I have checked all switches, coils,contacts..and find no zero switches on on payout counter. Is there another way this could be set up that I am missing?
I included pictures of the spiral cam at zero...and 5 steps up ..I do not see any switches open or close. I looked on the "B" switches on the RM and see 98 and 78 wires there, but i see them i
on two separate switches on the back of this payout unit.
Any insight would be greatly appreciated.
Update: I thought it seemed a little strange when the person I bought this machine from..he being a pinball machine and jukebox mechanic.."the hopper has never worked" No doubt..not after the hopper has been scavenged.. wires were cut so close I over looked them. There is no Payout Relay coil and switches, or Zero Stop switch.
Now the question..find another hopper, or rewire the payout assembly and switches..?