33
« Last post by kmarrocco on Yesterday at 05:17:14 PM »
Thank you for the diagram. I have traced it out and I believe I have all the connections from the mother board to the switches correct. Further, I have tested each switch with my ohm meter and they seem to be working correctly. Unfortunately, I am thinking the problem is in the motherboard or the main MPU board now. I am struggling a bit here because I do not have another main MPU board or motherboard to try out. Any suggestions? Maybe I need to send either of them out for testing?
Also, I see that only 3 of the 5 yellowish LEDs are illuminated on the main MPU board. Is this an indicator that something may be wrong with it?