Author Topic: IGT S2000 problems (Read 10344 times)

sixcardmark · « **Reply #60 on:** June 22, 2018, 08:56:22 AM »

I just installed the game and verified the 600 strip does go in 3rd reel. I guess it is time to clear if the strips are in the notches.

sportsman2381 · « **Reply #61 on:** June 22, 2018, 09:34:03 AM »

I ordered a new stepper base 100009 and i wanted to ask when you do a full reset does anyone know which game selection it should be on i think i have option of 1 through 10 i believe

sportsman2381 · « **Reply #62 on:** June 22, 2018, 11:53:20 AM »

i also have another question is there a marking for when you change out the reel strips for new ones ?

therockinelvis · « **Reply #63 on:** June 22, 2018, 12:00:17 PM »

Yes, there is a notch on reel and strips

Amechanic · « **Reply #64 on:** June 22, 2018, 12:13:48 PM »

The reel strips have a notch on one end that has to go into notch in the reel basket groove where the strips go.

sportsman2381 · « **Reply #65 on:** June 22, 2018, 12:26:59 PM »

hello everyone i cant thank everyone enough for there advice and input upon further inspection i think i have solved the reel issues it appears when i bought the machine reel 1 strip was not correctly installed and it was out of alignment so far all the pay outs are correct thanks Bill

Amechanic · « **Reply #66 on:** June 22, 2018, 12:54:33 PM »

Thanks good news Bill. You now learned to check the obvious first.

sportsman2381 · « **Reply #67 on:** June 22, 2018, 01:49:31 PM »

yes it sure is and yes i learned that i am new to the slot machine market. I also have one more question what should the payout percentage be set to ?

therockinelvis · « **Reply #68 on:** June 22, 2018, 02:17:00 PM »

I set all of mine to the highest even though odds are for the life of the machine

sixcardmark · « **Reply #69 on:** June 22, 2018, 02:19:27 PM »

Quote from: sportsman2381 on June 22, 2018, 12:26:59 PM

hello everyone i cant thank everyone enough for there advice and input upon further inspection i think i have solved the reel issues it appears when i bought the machine reel 1 strip was not correctly installed and it was out of alignment so far all the pay outs are correct thanks Bill

Glad you got it figured out.

sportsman2381 · « **Reply #70 on:** June 22, 2018, 02:34:08 PM »

thank you me too now if i want to make the percentage higher is there a key chip i would need to do this ?

therockinelvis · « **Reply #71 on:** June 22, 2018, 02:40:51 PM »

The same key 17 you used before. In the s2000 section it explains every setting. Turning on printer bill validator coinless etc.

sportsman2381 · « **Reply #72 on:** June 22, 2018, 02:54:31 PM »

alright great thank you also i know elvis mentioned it i have a printer in mine and can cash out my tickets but when i put them back in it says voucher in progress and then sends the ticket out

cowboygames · « **Reply #73 on:** June 22, 2018, 03:12:39 PM »

You need a TITO unit from our vendor Bettorslots to utilize tickets going into the machine

sportsman2381 · « **Reply #74 on:** June 22, 2018, 03:44:35 PM »

alright great i will order one is that simple to put in ?

Amechanic · « **Reply #75 on:** June 22, 2018, 04:07:46 PM »

It comes with full instructions and Jim will help you set it up if needed on the phone.

qbert · « **Reply #76 on:** June 22, 2018, 04:14:36 PM »

Please check the machine type 7.1.6 be sure it says upright.
Also make sure the reels themselves are also set on upright (screw on the side of the reel assembly)
Reel strips should end with 500, 500, and 600 in the third reel.
Be sure the strips are installed correctly and the detent on the strip engages on each reel.
SB100009 is the correct chip for your game.
Do this before you waste time with a clear
Rich

sportsman2381 · « **Reply #77 on:** June 22, 2018, 04:52:40 PM »

Thanks Rich the problem has been resolved reel 1 was mis aligned

therockinelvis · « **Reply #78 on:** June 22, 2018, 06:15:59 PM »

So you understand, any other machines you get will need the TITO also. And yes, NO one stays with just one machine. I just keep a 100 bill in the cash can and feed it in a couple times.

sportsman2381 · « **Reply #79 on:** June 22, 2018, 06:49:17 PM »

alright thanks for the advice and yea i can see myself getting a few more machines down the road

News:

NLG Site Navigation Menu

Author Topic: IGT S2000 problems (Read 10344 times)