Author Topic: IGT S2000 (Read 4148 times)

irascible51 · « **Reply #20 on:** November 05, 2019, 01:46:30 PM »

This becomes an addiction in my retirement. I've been looking some time for a player piano.....they are most available free but are transport prohibitve.....heavy. I'd like to have one of those old United or Williams shuffle bowl type "pin ball" machines too.

Okay, can anyone here know the difference between the IGT S2000 Double Diamond vs the Triple Diamond machines. None seem to have the nudge available. I'd like to find either a Double or Triple with multiple lines & with nudge. I like those Diamond machines but if I had more money a Texas Tea might be nice too.

sixcardmark · « **Reply #21 on:** November 05, 2019, 01:51:23 PM »

All nudge games are single line.

Those shuffle bowling machines are fairly easy to find.

irascible51 · « **Reply #22 on:** November 05, 2019, 01:57:00 PM »

Thanks Mark, that was a quick and helpful reply. Yeah, nothing that I could find either in that nudge department. You just can't have it all in life...ha ha. I have been enjoying my IGT S2000 Haywire with nudge but I haven't figured out what combinations triggers the "Haywire" mode.

Robert P.

sixcardmark · « **Reply #23 on:** November 05, 2019, 01:59:02 PM »

Any win can possibly trigger the haywire mode.

irascible51 · « **Reply #24 on:** November 05, 2019, 02:17:43 PM »

Yeah, what a blast....speaking of, I just got a 4 "Haywires" at 60 credits each. Most I've ever gotten out of this machine and yeah I've got the chips now and have to get goin on getting the payout percentage increased. FUN!

Best regards,

Robert P.

irascible51 · « **Reply #25 on:** November 07, 2019, 01:18:08 PM »

Hey everyone,

I just answered one of own questions (via "The Bunker"). So I've got the "sticky" but with all of the chips that are on that MPU circuit board I couldn't tell you which ones are involved to accomplish the "increasing the payout percentage" Now I've got the 224 Clear chip and I've got the 48 Key Chip. Do both of these chips use the same socket? In succession? Then replace the chip on the socket that the original chip was in (is that how this works?) So which one in that sticky section would be best (simplest) for just changing the payout percentage at this point.

"Non Plussed" here.

Thanks all,

b.p.

qbert · « **Reply #26 on:** November 07, 2019, 01:29:49 PM »

You just need to use the key 45 (45 not 48)chip then just change the player % after you do the key process. Remember when you key the machine there must be zero credits on the machine before you start.
Follow the key procedures below.( not the clear)

http://newlifegames.com/nlg/index.php?topic=323.0

Your going to adjust the "game select" 7.1.2

irascible51 · « **Reply #27 on:** November 07, 2019, 01:39:01 PM »

Thanks Q, sorry, it was a type on my part, I do have a 45 Key. Is the socket that this is going into is it obvious?

Stayouttadabunker · « **Reply #28 on:** November 07, 2019, 01:49:38 PM »

I would like to add that it is ESSENTIAL that the power is turned off EVERY time before removing/installing the MPU board

and that the chips are in the CORRECT orientation.

irascible51 · « **Reply #29 on:** November 07, 2019, 02:03:06 PM »

Yeah, I'm on to that stuff. I have a static strap and use it too (although I recall it was the CMOS stuff that was super sensitive).

How can identify the culprit in question (identifying numbers on existing chips?).

Thank you though,ounce of prevention better than pound of cure.

Robert P.

therockinelvis · « **Reply #30 on:** November 07, 2019, 05:21:37 PM »

It is the "SB" chip you remove. Pay attention to the notch on chips and install correctly.

irascible51 · « **Reply #31 on:** November 09, 2019, 11:40:31 AM »

Using the # 45 Key chip. Will it the SB100177 chip that I will be "toggling" on the MPU? Where do I go (what's the best way) to clearing the credits (there are about 500 credits on the machine and I won't want to have to play with all of coins)?

Thanks all,

b.p.

p.s. Then I guess that it's on to the "Accounting" and MTA 12, is that correct/best way?

Stayouttadabunker · « **Reply #32 on:** November 09, 2019, 01:57:37 PM »

Start reading the stuff in here for your machine...will solve ALL your questions....>>>

http://newlifegames.com/nlg/index.php?topic=21511.0

irascible51 · « **Reply #33 on:** November 09, 2019, 02:10:16 PM »

Outstanding! As usual. Thanks "Bunker"

Stayouttadabunker · « **Reply #34 on:** November 09, 2019, 02:15:26 PM »

Uhh...it's the same page as the other reply! You just didn't read it. haha
Knock off the credits by clearing them first either by playing them off or using a clear chip in where the SB socket is.

irascible51 · « **Reply #35 on:** November 09, 2019, 02:46:39 PM »

Hi ya "Bunker" but I tried to read it but it was a bit all encompassing...too much...I needed the Monarch Notes/Cliff's version...ha ha....do you remember those things....I also utilized Classics Comics Books for my Book Reports at school....sheez...how I made it through all of that.

Yeah, well inspite of the lean situation with my Deluxe Haywire at this point it would take me qutie a few pulls to blow through all of the credits that are the machine at this point. It was reluctant to use the Clear chip (thank you "RB") because I didn't want to lose everything and have to start at the beginning.

Thanks,

b.p.

Stayouttadabunker · « **Reply #36 on:** November 09, 2019, 03:02:34 PM »

You can clear the credits another way...cash out a ticket...lol

irascible51 · « **Reply #37 on:** November 09, 2019, 03:04:59 PM »

Hey hey....I certainly would go that route but this machine is coin in & coin out.....am I missing something here?

Stayouttadabunker · « **Reply #38 on:** November 09, 2019, 03:07:55 PM »

Yeah...a ticket printer...

irascible51 · « **Reply #39 on:** November 09, 2019, 03:20:13 PM »

Yeah, you said it brother!! Ha ha!!! Now I suppose that's the bad news and that's the good news.

News:

NLG Site Navigation Menu

Author Topic: IGT S2000 (Read 4148 times)