Vision Pinball - Error Some required components are not found

[gposing]

Using a 502 board
SG000248, VS009VX0, SB000353, card in video monitor ATA10065 BGM00102 Panther bucks  Machine came with the SB but I had to track down the other chips.  There were listed on the SB chip as being required.  Used clr97 and key chip 17.  after I key chip it will not access the key chip menu  I get a communication error with the video screen.  If i reboot again I get the message listed above.

[Stayouttadabunker]

Did the SB353 come with BGM102 ? SB353 is for a Vision game called "Pinball".

BGM102 is for a 3R5L5C "Panther Bucks" game that will work with SB338 or SB425 and with 846-29-700 reel strips.

I'm not sure but I think the SB353 is for a "Pick A Panther" game which would explain why you're getting the "Some Required Components Are Not Found" error.


If you have backlighting for the reels, I'd swap out that 502 for a 504B MPU circuit board or you will not like the noise.

[gposing]

The machine is a double diamond 3 coin vision pinball.  would you happen to have a list of the correct chips and card that I would need to make it work?  I pulled the card out and it does say Panther Bucks on the back of it.

[Dirtguy]

I have a vision pinball running:
ATA - 10054
BGM - 00041
SG - 000248
SB - 000149
VS - 009GX0

[gposing]

What is BGM?  Do know where I can buy the ATA, BMG and that SB chip?

[RB]

Bonus Game module. The BGM & ATA files are on the PCMCIA card inserted into the top slot on the monitor. I have the Pinball SB.