A dummy pulled out or installed a door button deck I/O card ( The one that goes on the glass sideof the door panel ) while the machine was powered on. ( Noooo...it wasn't me
)
Below is a photo I just took of two door I/O cards removed from their respectives metal housings....side-by-side.
The 1st card on the left is the burned out one....smells like crap.
I already unsoldered the brown C5 location cap and placed it on top of the Molex housing.
Positive (+) is twards the right on this circuit board.
The 2nd card on the right is a known good 801 I/O card.
The numbers etched onto the top of the body of the C5 cap are...>>>
335
35k
008
The 3rd picture I posted below is a good photo of this Tantalum C5 cap.
This Mouser link below is a webpage of various caps.
Which one would you recommend?
I think I need the voltage of it and the uF value to order the right ones...>>>
https://www.mouser.com/c/passive-components/capacitors/?q=335%2035k%20006&m=KEMET