Author Topic: WBA-12-SS BV issue (Read 2525 times)

Stuckathome23 · « **on:** May 06, 2020, 07:30:34 PM »

Hello, so I am new to the slot machine side of ownership, and I am having problems with the bill validator that I bought off spin. My machine didn't have a harness for it so I bought one also, and I can get it to turn on and test but can't get it to take any bills. I have looked through the other topics and didn't see anything that helped me. Any help would be greatly appreciated.
Thanks!

Amechanic · « **Reply #1 on:** May 06, 2020, 08:01:04 PM »

What machine do you have this in? Hopefully you bought the bill acceptor for your machine? IGT, Bally each use a different software version.

Stuckathome23 · « **Reply #2 on:** May 06, 2020, 08:04:18 PM »

Hello, it's an IGT, I got to from spin that it's the correct BV.

sixcardmark · « **Reply #3 on:** May 06, 2020, 08:06:25 PM »

Quote from: Stuckathome23 on May 06, 2020, 08:04:18 PM

Hello, it's an IGT, I got to from spin that it's the correct BV.

For S+ or S2000?

Stuckathome23 · « **Reply #4 on:** May 06, 2020, 08:29:53 PM »

I believe it's an s2000 model#96438300
Triple double jackpot.

sixcardmark · « **Reply #5 on:** May 06, 2020, 08:47:04 PM »

Quote from: Stuckathome23 on May 06, 2020, 08:29:53 PM

I believe it's an s2000 model#96438300
Triple double jackpot.

OK is the BV you bought from spin programmed for S2000 or S plus? They use different software.

Stuckathome23 · « **Reply #6 on:** May 06, 2020, 09:00:18 PM »

I guess I'm not sure. Is there a way to be able to tell, or to reprogram it?

Amechanic · « **Reply #7 on:** May 06, 2020, 09:20:49 PM »

First we need to know what machine you have. Can you post a pic. You should see a sticker on your bill acceptor that has what software version it has.

Stuckathome23 · « **Reply #8 on:** May 07, 2020, 05:13:13 PM »

Hello, I tried to upload a picture but it's to big. Anyways, How do I tell what software it has on it? I know it has 8 dip switches on the front right side of it.

sixcardmark · « **Reply #9 on:** May 07, 2020, 05:36:23 PM »

Resize the pic. Do you have a copy of paperwork from spin that came with it? It should say what machine it is for or there should be a sticker with a number on it on the BV,

Amechanic · « **Reply #10 on:** May 07, 2020, 06:07:33 PM »

Quote from: Stuckathome23 on May 07, 2020, 05:13:13 PM

Hello, I tried to upload a picture but it's to big. Anyways, How do I tell what software it has on it? I know it has 8 dip switches on the front right side of it.

If you use your phone, I will send the pic from my email to me email. When sending a pic my phone asks how big Iâ€™d like the file being sent. Use one under 1K and you should be fine.

Stuckathome23 · « **Reply #11 on:** May 07, 2020, 06:45:19 PM »

Here are a few I think I got to work.

Amechanic · « **Reply #12 on:** May 07, 2020, 06:53:36 PM »

Looking for a sticker thatâ€™s says something like v3.80 ID024

Stuckathome23 · « **Reply #13 on:** May 07, 2020, 08:19:48 PM »

I did not see anything like that. Those are the only stickers I saw on the bv. Nothing else, not even any markings. I did send an email to spin to see what was uploaded.

rickhunter · « **Reply #14 on:** May 08, 2020, 07:24:33 AM »

Did you enable the validator with netplex autoconfig? When you say you are able to test it, how are you doing that?

Stuckathome23 · « **Reply #15 on:** May 08, 2020, 08:04:22 AM »

Hello, spin got back to me and said that the bv is for a IGT S2000 and is programed as IDO24. Bv is enabled and by testing it I flip the dip switches on except for #8.

rickhunter · « **Reply #16 on:** May 08, 2020, 08:36:32 AM »

Does the validator cycle "makes noises" when you power up the machine? Are you able to do a bill test using the I/O tests (should be test 4.8 Bill Test)? where you insert a bill and the machine will tell you what bill you inserted.

Stuckathome23 · « **Reply #17 on:** May 08, 2020, 11:14:48 AM »

The bv does make noises when starting up and then makes 2 clicks, I can't get into the bill tests but it does show up on the screen just can't click into it. Also, when I go to Auto-configure Netplex devices, it says Bill acceptor: not responding. But I do have 2 red lights on the bv that are staying lit not flashing.

Stuckathome23 · « **Reply #18 on:** May 08, 2020, 11:35:53 AM »

The wires coming from the harness I noticed not all are plugged in but I don't have a printer so not sure if this is suppose to go to the printer or not.

Amechanic · « **Reply #19 on:** May 08, 2020, 11:47:51 AM »

The harness doesnâ€™t use every plug. When you bought your bill acceptor, did you buy a whole assembly from spin, or just a transport, or bill head separate? Can you take a picture of you slot machine from the front with door closed and one with it open. Like to see what machine you actually have.

News:

NLG Site Navigation Menu

Author Topic: WBA-12-SS BV issue (Read 2525 times)