Hello,
*** sorry, Google Translate ***
I was looking for a piece of furniture to install an S2000, but my wife had very specific criteria. It had to be white and not too bulky.
While looking, I found a sideboard at Ikea, the BEKVAM model. It is sold new for 50 €, I bought it for 20 € second-hand.
The purpose of the transformation will be to shorten his feet for the total height from the ground to above the plateau is about 500 mm.
The cut will be made at the level of the black lines below.
The top is 28mm thick. The feet were cut to 478 mm. The total height is therefore 506 mm. In inches this gives 19.9 "while the documentation for the IGT S2000 indicates an ideal height of 22", or about 550 mm.
The legs were cut with an electric miter saw, with a stopper so that they were all the same length.
The bottom view of the board.
Once the feet are cut, I run a sander and create a slight chamfer at the bottom of the feet. The top is also sanded, above and below, without forgetting the side faces.
To paint all the faces at once, I suspended the feet.
Obviously in photos it does not look great, but the result is really satisfactory for lacquer rolled and without greasy coating.
The legs and the top were painted with a mini lacquer roller.
This part acts as a shelf but it also serves to stiffen the whole. A machine weighs in the 100Kg and this reinforcement is welcome. To paint it a little more difficult because the small slats are nailed, so brush required.
Here is a beautiful stands for machine !