Author Topic: dallas DS1216 battery for ballys video poker (Read 7339 times)

drfreeze1739 · « **on:** April 18, 2014, 03:18:21 PM »

i need to find this dallas battery for my bally video poker.

dallas DS1216

any know where to find one?

any one have one for sale?

please let me know...

thank you..

Paul · « **Reply #1 on:** April 18, 2014, 07:10:04 PM »

Mouser.com has them but you need the DS1216E.
And they are $50 plus shipping.

drfreeze1739 · « **Reply #2 on:** April 18, 2014, 07:13:03 PM »

Ok. thank you..

i will check them out..

mine shows a D

Wat it the diffrence between the D and the E?

Paul · « **Reply #3 on:** April 18, 2014, 07:17:38 PM »

The circuit board is where you get the letter. There is B,C,D,E,F and H boards.
Here is the data sheet.

http://pdfserv.maximintegrated.com/en/ds/DS1216-DS1216H.pdf

drfreeze1739 · « **Reply #4 on:** April 18, 2014, 07:20:33 PM »

oK.

Will look and see..

Thank you..

these are $$$$,,,, Man,,

Paul · « **Reply #5 on:** April 18, 2014, 07:24:44 PM »

That is just a Rom chip and board.
Are you having a low battery problem?
If so the top part of the chip is where the battery is
and would most likely be the only thing to replace.

drfreeze1739 · « **Reply #6 on:** April 18, 2014, 07:42:30 PM »

From what i read on them that is the battery?

yes im having low battery and a hole bunch of other errors.

im thinking because of the low battery...

there is a rom chip that plugs into this dallas one,

Paul · « **Reply #7 on:** April 18, 2014, 07:54:20 PM »

The part that is turned up side down should be the battery

Turn over the other part in your picture and post a picture of it.

drfreeze1739 · « **Reply #8 on:** April 18, 2014, 08:02:10 PM »

that is both sides... one shows it turned over an the other side is the top side after the rom chip has been removed.

i will post three pics of it.

drfreeze1739 · « **Reply #9 on:** April 18, 2014, 08:13:50 PM »

first pic is bottom side..

Pic two is top side with rom chip installed on it.

Pic three is top pic with out rom chip installed on it.

Paul · « **Reply #10 on:** April 18, 2014, 08:36:54 PM »

The first picture posted, the chip with the legs up, is there any thing stamped on it?
How many chips do you have. I have seen a "C & E" chip.

drfreeze1739 · « **Reply #11 on:** April 18, 2014, 08:58:16 PM »

there is one chipand it that has a C

THE first pic i posted in the first post was a pic i took off of ebay is the E

Paul · « **Reply #12 on:** April 18, 2014, 09:20:12 PM »

then you need a DS1216C
Jameco has them and there only $25

http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_133410_-1?avad=55097_d66083bf&source=Avantlink

Paul · « **Reply #13 on:** April 18, 2014, 09:24:46 PM »

What is the markings on this part?
The one on top in the picture.

drfreeze1739 · « **Reply #14 on:** April 18, 2014, 09:31:41 PM »

That one shows

japan
8464a-10L
9210 T27

Paul · « **Reply #15 on:** April 18, 2014, 09:42:33 PM »

You can get this one (8464a-10L) on ebay for $5.00

http://www.ebay.com/itm/Integrated-Circuit-8464A-10L-NOS-/300962862695?pt=LH_DefaultDomain_0&hash=item4612c8d667

drfreeze1739 · « **Reply #16 on:** April 18, 2014, 09:49:05 PM »

Do you think i need to replace this chip also or just the battery one?

Badbaud · « **Reply #17 on:** April 18, 2014, 10:43:54 PM »

The chip has a battery in it but you can't get to it you have to replace the whole chip.

The battery stays dormant until the chip is plugged into a board and powered up.

Then the battery turns on forever.

Larry at K-LAR may have the one you need. 702-363-9998 M-Sun 11AM - 5 PM PST

drfreeze1739 · « **Reply #18 on:** April 20, 2014, 08:08:54 AM »

thank you Proten for all in info and help.

i just orderd one from http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_133410_-1?avad=55097_d66083bf&source=Avantlink

Do you think i should replace that top rom chip also?

Paul · « **Reply #19 on:** April 20, 2014, 08:26:21 AM »

It's a 50/50 crap shoot. The one on top is the ram chip and the Dallas is the backup battery for it.
It could be that the battery has died due to old age or the chip could have shorted and drained the battery.
I would replace it due to its age and $5 is cheaper than $25 for another Dallas chip.

News:

NLG Site Navigation Menu

Author Topic: dallas DS1216 battery for ballys video poker (Read 7339 times)