WTS Gold Fish 2 topper.

[cp]

I have a topper for a WMS  BB2  GoldFish2.  Look at the picture... it does NOT have the BASE that mounts to the cabinet.  I'll sell the whole topper as pictured:  $65.  or  just the insert:  $45.    It may be NOS  ( new old stock )  I bought this couple years ago and never installed it.  Original packing/shipping box.

[Yoeddy1]

PM sent.

Jason

[rydiez]

I badly need this been looking for a while if still available please let me know!

[Slot Queen]

I realize that this topper has been sold, but I was wondering if someone could tell me if this style, with the base, would work with a Goldfish 1 machine (BB1).  Or if it is only compatible with BB2...


Any help would be appreciated. Thanks!

[rickhunter]

There are a couple of variations of the goldfish 1 cabinet that I have seen.  If your cabinet has a slight slant from the front to the back, you will need a base with the matching slant to mount the topper, otherwise it will be tilted back.  I have also seen goldfish 1 cabinets with flat tops, and then those will just require the topper with the flat base.  If I remember correctly, the original Goldfish 1 toppers had the  "upside down mickey" look.

[Jimise]

Here is the upside down mickey look.....

[cp]

Or I do have the Gold Fish topper  that I use as my Avatar(?) is that correct compu-speak?

I'll see if it's on the shelf if anyone interested in it.   I remember I had to customize the mounting bracket  so it would bolt onto a BB1 cab.