21
Bally Electromechanical / Re: Bally 809-N
« Last post by DavidLee on Today at 09:59:11 AM »Re: the lights,
Checking the actual light, socket, and wire connection tab would be first then proceed from there.
The buzz from the handle pull might be coming from the handle release coil/switches.
Try inserting a coin or depressing the coin trip wire. Wait a few seconds and slowly pull the handle.
See if that makes a difference, buzz or no buzz.
The bell and service/change light I believe operate on the same common solid blue wire.
There’s also the red wire that signals the bell when a jackpot is made.
Check the light(s) in the fixture on top of the machine.
The blue and or black/yellow wires should be traceable back to the switch.
Wire colors are from memory and may be different in your machine.
Checking the actual light, socket, and wire connection tab would be first then proceed from there.
The buzz from the handle pull might be coming from the handle release coil/switches.
Try inserting a coin or depressing the coin trip wire. Wait a few seconds and slowly pull the handle.
See if that makes a difference, buzz or no buzz.
The bell and service/change light I believe operate on the same common solid blue wire.
There’s also the red wire that signals the bell when a jackpot is made.
Check the light(s) in the fixture on top of the machine.
The blue and or black/yellow wires should be traceable back to the switch.
Wire colors are from memory and may be different in your machine.