I haven't been involved much in this thread. Hopefully someone will chime in and help. There probably will be one button that might work to select the settings. Then, when you turn the key that will save the setting and advance down to the next. Try pressing the button and see if the first selection under JURISDICTION will change from "not selected" to one, two, three, etc. If you see ONE, then turn the key and it should save that and drop to the next.
These are the typical settings for this machine, but these are for normal Game Makers... so who knows what will happen here. But it's worth a try. Some settings will be default and won't let you change them.
Jurisdiction – ONE
SAS – 2.83
Chassis Type – UPRIGHT
Coin Acceptor – COIN ACCEPTOR
Bill Acceptor – JCM DBV
Hopper – COIN
Door Type – MECHANICAL
Double Down – ON
Tournament – ON
Primary Host – NONE
Secondary Host – NONE
EFT – DISABLE
Secondary Device – NONE
Typical settings for a V7200 model are as follows:
Jurisdiction – ONE
Primary Host – NONE
Secondary Host – NONE
SAS – NONE
Chassis Type – UPRIGHT
Coin Acceptor – COIN ACCEPTOR and COD BOARD
Bill Acceptor – JCM WBA
Hopper – COIN
Door Type – PULSED OPTIC
Double Down – OFF
Tournament – OFF
EFT – DISABLE
Secondary Device - NON