I looking for some help or advise on this machine. I just picked it up last week and I noticed that the main door that holds the 32" monitor won't close and latch. I have tried everything but it just seems like the latch does not push all the way back to make the hinge lock. I found a couple of adjustors but they dont help. Has anyone with this machine had this type of issue? If so how did you fix it?
Thanks for any help you can give.
*****Solved*****
After spending a couple weeks on this issue and taking a lot of thing apart. This issue was being caused by the bill validator bezel. The bezel was causing the Ideck door not to close properly. Which in turn was causing the top door not to close all the way so it would not lock the latches.
I had to grind and sand both bottom edges of the bezel off, which allowed everything to close correctly. Now the door finally closes all the way and latches.
Problem solved..... Thank God!!!!