I have a 044 board that plays fine after you clear it.Turn the machine back on after a hour or so and still good.Leave it sit overnight and wont boot.2nd amber light from the left not lit.If I clear the board works fine again.
I replaced the round "watch" battery so far,still does it.Would it be the other battery thats bad?
Any ideas?
Thanks in advance.
laneman
« Reply #2 on: December 23, 2011, 11:09:30 PM » |
Do you have another 044 board to try? I was thinking heat too, but if you can reset it and it goes back to normal, I suspect the board might have a problem.
Jason
« Reply #3 on: December 23, 2011, 11:34:02 PM » |
Machine works fine with another board.
laneman
« Reply #4 on: December 23, 2011, 11:53:51 PM » |
That's good Laneman!
I'd leave it on for a couple of days to see if the problem comes back.
If not, then you'll narrow it down to the other MPU board.
If the problem comes back even with this new board in -
then the problem may possibly lie with a power supply?
stayouttadabunker
« Reply #5 on: December 24, 2011, 12:14:52 AM » |
If I put the board thats acting up in another machine the problem follows.Definitely something with the board.
laneman
« Reply #6 on: December 24, 2011, 08:37:45 PM » |
I wonder if this might help any Lane?
Click on snapshot below to enlarge...>>>
stayouttadabunker