S2000 Denom LED lighting

[qbert]

First that is a T10 size base, the base for the denomination bulb is a T5.
Second. That is what you do NOT want in a black T5 holder. The leads must not wrap around the base like the one you pictured.

[Terps]

First that is a T10 size base, the base for the denomination bulb is a T5.
Second. That is what you do NOT want in a black T5 holder. The leads must not wrap around the base like the one you pictured.

Qbert,


I used the link you provided and ordered the exact one you advised. I see it has the wires on both sides, not like the picture included in your link. How do I tell,it is a T10 and not T5? I guess Inwill return and request a T 5 with one wire per side. Any other ideas?


Fusco

[Terps]

Qbert,


I have requested a return for the right LED. Thank you for replying. I will let you know when I receive it and post a picture. I just want to get these ordered and improve the lighting of the machine.


Thanks
Fusco

[sixcardmark]

You can use those T10's you ordered to replace the older bulbs in the 5 buttons.

[qbert]

This is the link I gave you. The bulb you pictured is totally different. They will work in the buttons as indicated in the post above

These bulbs are plenty bright you will probably have to shield them slightly so you don't get the spot light effect.
They will work with the black holder note wire on just one side for each lead
https://m.ebay.com/itm/20PCS-12V-White-T5-2835-1SMD-Instrument-Gauge-Dash-Indicator-LED-Light-Bulbs-/152582500079?epid=752961681&hash=item2386a02eef%3Ag%3AxPYAAOSwpkFY7yo4&_trkparms=pageci%253Ae7e2535e-a48e-11e7-be50-74dbd18043d1%257Cparentrq%253Aca42e05715e0abda6d201e38ffdb6c6d%257Ciid%253A18

[Terps]

Ther are resending me my original order for free, but it takes about 14 days to come in. I'll us the T 10" for the buttons on the panel and wait for the corrected bulb for the denomination.  Thanks for all your help Ken, Qbert and sixcardmark. Really appreciate it! Shouldn't be this complicated


Fusco

[therockinelvis]

I have found that the bulbs that have the wire on both sides, you can bend it back to one side only and have no problems.

[Jim]

here is the LED strip, these are not white 5050 LEDS, out of those right now.  the 5050 are much brighter, but you will get the idea.  the two wires come out through the hole where the bulb socket would be, then you tie the two wires into the two wire plug that would have connected to the panel.