Recent Posts

Pages: 1 [2] 3 4 ... 10

IGT I-Game and Game King / Re: Brand new Machine owner... Potential issue

« Last post by dunginhawk on Yesterday at 11:08:30 PM »

So Im not 100% sure if it worked or not... I only sprayed the pins on the board that slides in to the main board.
I did get the error one more time after that, but havent had it happen since.
I now have it in its final place, so hopefully I dont need to move it, or take the board out...

im still probably not able to remove any chips.. there are so many, im not sure which one it is

IGT I-Game and Game King / Re: IGT Game King Multigame doesn't boot up

« Last post by Tilt on Yesterday at 08:47:45 PM »

Yeah, the 3902 boards and 044 boards from what I've seen are pretty good about getting the red blinking led when they don't boot because of software or another issue.

My initial thoughts is you probably have failing CCFL's since it worked a little bit and then died during setup with the new inverter board. Usually they will take out the fuse, but it may have taken out something else. Unfortunately, you probably need a new LCD panel, but it would probably be best just to find another complete working LCD monitor for it.

Aristocrat Video Gaming Machines / Re: NSW Mkv / mk6 **note acceptor door open

« Last post by Daz_351 on Yesterday at 08:28:33 PM »

did u resolve this ?

Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Bally Alpha 2 Denom removal

« Last post by PDuble on Yesterday at 08:18:29 PM »

Hello, I have several Bally Alpha 2 (V32) running UFL. These machines were configured for multiple (5) denoms. Is it possible to remove one of the denoms without RAM clearing it? If so any instructions would be greatly appreciated. Thanks in advance.

NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Igy Ekey000007

« Last post by icdeadfish on Yesterday at 07:50:55 PM »

have many ? need help to i.d. what machine i bought and a story i think i need a eked my email is icdeadfish2@yahoo.com i have phots and some #s thanks

NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: EKEY 7 and diagnostic 14-21

« Last post by icdeadfish on Yesterday at 07:35:26 PM »

Can you identify this machine bought last week I read replace button batteries may get the top screen to work well took out 1 in on board in brain box and 2 at top of brain box one was 2.90 others were 3 v put them back now machine won’t power up on the good lower screen I just hear beeps yellow flashing lights on motherboard and solid row of green lights. The name tag is missing on the right side. Here is some photos & #s I found inside.Found this sticker on inside looks like a bar code 100001924417 TLAVP 412504 ON BRAIN BOX was model 50062500W serial # 21810249 5-1-12 did see some dates inside the cabinet looked like 2008. Now it’s a 250 lb paperweight please help or send me in right direction I can’t figure how to post on forum. Can’t see where to add pictures I can send them to your email.

NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Need bally s6000 game chips

« Last post by erbs on Yesterday at 07:24:01 PM »

Contact member RB he should have them.

NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Need bally s6000 game chips

« Last post by Coloradonewbie on Yesterday at 06:25:28 PM »

I need game chips for Blazing 7's 3 coin.
I also need newer mains so I can install tito.

IGT AVP (Including G20,G23) / What type of buttons are these?

« Last post by sakwilla on Yesterday at 06:12:14 PM »

Bought 8 buttons and connected them all up and turned machine on - they seem different to the two at the bottom row (bottom left and right) No issues with them but they seem slightly thinner to the other two. Just want to know if they are a special type as usually when I buy them they are the standard. IGT ones life the bottom left and right ones.

IGT S2000 and Vision Games / Re: where to find /igt s2000 ez play selectable multi denom keypad replacement

« Last post by TheEyeInTheSky on Yesterday at 06:04:27 PM »

If you're looking for the multi-denom decal, then here are 2 simple places to start. What denom values are you looking for?

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=igt+multi-denom&_sacat=0&_odkw=igt+s2000+multi-denom&_osacat=0

https://get-t.net/product/igt-s200-touch-denom-pad-w-control-board-and-brackets-complete-door-kit-gett-part-td100/