Mills slot id?

[Haywire Slots]

Anyone have any knowledge on this particular machine?

[Haywire Slots]

Here's  the bottom half.

[63mini]

The machine is a Mills QT (Hash Mark). It looks like there is no mech in it. As, for the figure it's placed in. I do not know. There were a few people that made those.

[Haywire Slots]

The machine is a Mills QT (Hash Mark). It looks like there is no mech in it. As, for the figure it's placed in. I do not know. There were a few people that made those.

Correct on the machine. probably a 46 or 47. I'm curious about the indian. Have not been able to find any info on the female one. Tons of stuff out there about the Male version.

[63mini]

 If I had to guess on the figure. I would say it was made by Dick Delong in PA. They have made some other figures with QT's in them.

[Haywire Slots]

If I had to guess on the figure. I would say it was made by Dick Delong in PA. They have made some other figures with QT's in them.

Was thinking it might be one of his. Did not see his signature mark on the underside of the bust though.

[63mini]

 I guess you could always send your photo to them to confirm. I don't do Facebook but, it looks like they have a page. The base in your photo uses the octagon shape like most of DL's figures.

[Haywire Slots]

I guess you could always send your photo to them to confirm. I don't do Facebook but, it looks like they have a page. The base in your photo uses the octagon shape like most of DL's figures.

Good idea! I'll give that a try, will post results. Thank you.

[Haywire Slots]

Update. I shot a pic over to DL's. They verified it is his work.
 Any idea of the value on these machines?
  Also the mech is missing, so I'm now on the hunt for one. If anybody has one kicking around, please contact me.
  Thank you.