Spin reels problem

[therockinelvis]

Been messing with S+ all day. When I set the machine up the spin button worked to change settings. Now when bet one spin button will not work. I changed the button and still same. When I enter the test by pushing test button, I can only go a few pushes until I get a 10-1 then solenoid for handle clicks and spin button lights but will not get beyond. Pushing white test button does nothing, have to turn machine off to play game again. Using sp1274 and ss4633

[foster]

Sounds like you are suck in the input test page

Pressing the Self test switch should go to the next page
If not try turning the jp key just once then try the test switch again.

Here is the numbers mean

Input #  Input
10         Coin in A
11         Coin in B
12         Coin in C
13         Door closed
14         Hopper coin out
15         Hopper full
16         Handle/Spin button
17         Jackpot reset key
20         Bet One Credit
21         Play Max Credits
22         Cash Out 
23         Change light
24         Reel mechanism
25         Self test button
26         Card Cage
27         Bill acceptor
30         (Reserved)
31         Drop door
32         Jackpot to credit key
33-37    (Reserved)
40         Reel #1
41         Reel #2
42         Reel #3
43         Reel #4
44         Reel #5

[therockinelvis]

After a lot of thinking, the button was working fine. The pull handle had been disconnected. After plugging the solenoid and attaching the wire to the switch the button stopped working. So there must be a problem with the pull arm. I am going to disable the pull arm and see if that does it. More important to have button than arm.

[therockinelvis]

OK I cut the yellow wire going to the pull arm and unplugged the solenoid and now the spin reels button works again. I think it more important to have button over pull handle.

[cowboygames]

Sounds like a probable bad micro switch on the pull handle