Igt s plus 5 times pay

[Patrickmerc]

I am still not getting anywhere with this machine always thinking the door is open. I bypassed the cash box door switch. There's a switch on the back wall of the cash box with a six blade terminal with nothing going to and no wiring harness anywhere near it. Any ideas.

[knagl]

Please stop creating new threads for the same issue with the same machine. I have merged all four of your threads about this machine into this one thread.

Creating new threads for the same issue with the same machine just causes confusion about what you've already tried to fix it.

Thank you.

-Kevin
  Admin

[Patrickmerc]

Thanks Jim you were right I moved them and now I have a display

[Stayouttadabunker]

Take a picture of the belly door switch.

[Patrickmerc]

Such as

[Stayouttadabunker]

Nevermind...I'm glad your machine's display is working now, but you need to get the cabinet receiver optic to see the door emitter, in order for the machine to work.

Earlier, (Reply #67) I asked you to shut OFF the machine, move the reels by hand, then power the machine back ON.
Your MPU should have returned the reels back to their original position after you moved them.
It doesn't matter if the door was open or closed, the reels should have moved.
That didn't happen.

Go shopping.
You need a new MPU.

[Patrickmerc]

Thanks. I am not familiar with the process. I bought this machine not working from a guy who got the machine in lieu of money. Do they disable them on purpose?

[sixcardmark]

Is it seeing the door open and close now?

[Patrickmerc]

No sir.