Fixed it!
so my monitor was very blue. It would not adjust blue at all Red and Green would change but Blue was just ON. Had blue horizontal retrace lines as well. So pulled the monitor board and swapped the Red and Blue precision array amplifier boards. Restart and sure enough now I have way too much Red. So I pull the bad precision array and do some searching. Looks like it is a part specifically made just for Ceronix monitors, there may be some available from Columbia. They are either 18,500$ each or if that price is in Columbian currency about $4.50US so around 10 bucks if it is not an internet scam.
Just for fun I put it under a video microscope and dog if one of the little rectangular regions doesn't look burned. Using the Ceronix service manual I guess it is a 270 ohm resistor. For kicks and grins I solder one in and voilà back in business. So no used ebay chassis for 70$ and no sketchy Columbian electronic part just a 5 cent resistor and back to loosing nickels 10 at a time.