41
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.
« Last post by Sunrise Side on Yesterday at 10:09:57 AM »S5500
Welcome to the NewLifeGames.com message forum!
|
41
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by Sunrise Side on Yesterday at 10:09:57 AM »S5500
42
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Yesterday at 10:06:40 AM »I don't have a V5500. But the BV wiring looks the same between my S5500 and my V7000. 43
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by David Walz on Yesterday at 09:54:22 AM »Let me check the wiring.
Then I will need to look at the backplane J16 wiring connector. 44
IGT AVP (Including G20,G23) / Re: First impressions owning a G20« Last post by sftechgeek on Yesterday at 09:50:28 AM »Ahh, yes, I see the difference in the Crystal series. Basically the Crystal Dual looks like the G23 but runs Fam20 games? Did they do away with most of the physical buttons? So the screens are 27" and the topper can be a 3rd monitor?
That's quite a bit of $$$ to have a machine shipped up North. From Ohio to California it would cost me $400 for a pallet to be shipped. Already received my HDD from RB which is a must have if you want those Fam14 resources. Though the wife ain't too happy with my new found hobby, she's really going to flip when another machine ends up in the living room... Thanks for sharing... 45
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by Sunrise Side on Yesterday at 09:40:40 AM »Only difference I seen in your schematic is the BV reset button.
46
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by Sunrise Side on Yesterday at 09:39:21 AM »V7000
47
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by Sunrise Side on Yesterday at 09:36:29 AM »Here's the V7000
48
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally V5500 getting it working again.« Last post by Sunrise Side on Yesterday at 09:33:47 AM »I don't have a V5500. But the BV wiring looks the same between my S5500 and my V7000.
Here's the S5500 49
Show off your Home Game Room / Re: Best Slot Hits at Home« Last post by shortrackskater on Yesterday at 09:30:30 AM »Does anyone play their own slots anymore???
Well I hit the jackpot on my recently restored (just to working condition from an older restoration) Jennings Century. I didn't know if the jackpot "pot" would release to the tray, OR if the reserve (the window above) would then drop into the jackpot area on the next pull, but as you can see... success! Of course, you can easily set up mechanical machines to test jackpots/payouts, etc., but I like to just play it until it happens! See PHOTOS first, then watch video. 50
Bally Electromechanical / bally 1090-106« Last post by mojorisin on Yesterday at 09:25:04 AM »Cool little board you guys got here.
I am a extreme novice when it comes to slot machines so please bear with me as I trash the slot world language. I have a bunch of issues but I will fix them one by one. The issue I am tackling now is when I insert a coin (or manually flick the switch) it registers the first coin just fine. Its the subsequent coins that are not registering. I can go up in the top and manually push the solenoid and the payout lights will appear as you would expect it would if another coin was dropped. What triggers that solenoid or is there something else I should be looking at? Thanks in advance for any help. |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |